Description
Trimming 4.6×30 brass by hand gets old in a hurry, and dedicated tooling for this cartridge isn't exactly sitting on every shelf. That's what makes the Lee Precision Quick Trim Die Ltd. Production 4.6×30 worth grabbing when you find it. It's a purpose-built die sized for the 4.6x30mm case, letting you trim to a set length without fussing with calipers or guessing.
The idea behind the Quick Trim system is simple. The die holds the case securely while you turn the matching cutter, so the mouth comes out cut square and consistent every single pass. It also chamfers the inside and outside of the case mouth in the same motion, which means fewer separate steps on the bench and brass that's ready to load. No measuring, no adjusting between cases, just repeatable results batch after batch.
How the 4.6×30 Quick Trim Die Fits Your Setup
This die threads 7/8"-14, so it screws right into any standard reloading press just like a sizing or seating die. It's meant to run with the Lee Deluxe Quick Trim Case Trimmer, the Deluxe Power Quick Trim, or the Value Trim Case Trimmer, all of which are sold separately. The cutter handles the spinning while the die keeps the case locked in place and square to the cut.
Why the Limited Production 4.6×30 Die Is Worth Snagging
The 4.6×30 is a niche round, and Lee runs these limited production dies in smaller batches to cover cartridges that don't get mainstream tooling. If you're loading for a 4.6×30, support like this isn't easy to come by, so having a dedicated trim die on the bench takes a lot of the headache out of case prep. It's built from steel for the long haul and does one job well, which is exactly what you want from a trimming tool. Keep in mind this is the die body only, so you'll need the compatible Lee trimmer and cutter to put it to work.
Key Specifications
- Brand: Lee Precision
- Product Type: Quick Trim Die
- Cartridge: 4.6x30mm
- Production Status: Limited Production
- Thread Size: 7/8"-14
- Material: Steel
- Compatibility: Lee Deluxe Quick Trim, Deluxe Power Quick Trim, Value Trim Case Trimmers
- Shellholder Included: No
- Manufacturer Part Number: 91992
- UPC: 734307919924
- Shipping Weight: 0.33 lb
What’s Included
- Lee Precision Quick Trim Die Ltd. Production 4.6×30 (die body only)
Frequently Asked Questions
Do I need anything else to use the 4.6×30 Quick Trim Die?
Yes. This die is the body only and works with a separate Lee Quick Trim case trimmer, such as the Deluxe Quick Trim, Deluxe Power Quick Trim, or Value Trim Case Trimmer. The cutter does the trimming while the die holds and squares the case, and both are sold separately.
Does the Quick Trim Die require measuring or calipers?
No. The whole point of the Quick Trim system is to skip the measuring step. Once the die is set up in your press, each case trims to the same length automatically, so you can run through a batch without stopping to check with calipers.
Will this die chamfer the case mouth too?
It does. As the cutter trims the case to length, the system also chamfers the inside and outside of the case mouth in the same operation. That means less separate deburring work and brass that's ready to prime and load.
Why is this listed as limited production?
The 4.6×30 is a specialty cartridge that doesn't get the same tooling coverage as mainstream rounds. Lee runs these limited production dies in smaller batches to support those less common calibers, so availability can come and go depending on stock.



Reviews
There are no reviews yet.