Description
The Lee Production Pot IV is one of those tools that earns its keep the moment you start casting in volume. It holds roughly 10 pounds of lead in a large, deep pot, and the 500-watt tubular heating element gets you to pouring temperature in under 20 minutes. This is the 220V version, so it's set up for electrical outlets used outside the US. One thing worth knowing up front: it ships without a plug on the cord, since outlet styles vary from country to country, so you'll attach the plug that matches your setup.
What sets the IV apart from the standard Production Pot is clearance. You get a full 4 inches under the spout instead of the usual 2, which is a bigger deal than it sounds. That extra room means the pot plays nice with pretty much every brand of bullet mold and most sinker molds, so you're not fighting for space when you slide a mold under the spout to catch your pour.
What the Production Pot IV Does Well
This is a bottom-pour design, with the spout right up front where you can actually see what you're doing. An adjustable flow valve lets you dial in the stream so you're not chasing drips or dealing with a flood. The infinite heat control is the smart part of the layout. It sits away from the high heat of the pot and lets the heater run at full power until your metal is fully melted, then eases back to hold temperature while you work.
Who Reaches for a Lee Production Pot IV
Casters pouring handgun and rifle bullets lean on this pot for steady, repeatable results, and it's a favorite among folks making jigs, sinkers, and custom tackle too. It handles jigs under half an ounce and sinkers up to about an ounce without complaint. A large, stable base keeps things planted on the bench while you cast, and Lee backs it with a two-year warranty. If you cast regularly and want a dependable pot that keeps lead ready to pour, this one's a workhorse.
Key Specifications
- Manufacturer: Lee Precision
- Model: Production Pot IV
- Manufacturer Part Number: 90008
- UPC: 734307900083
- Capacity: Approximately 10 lb of lead
- Voltage: 220 Volt (export model)
- Wattage: 500 watts
- Pot Diameter: 4 inches
- Spout Clearance: 4 inches under the spout
- Melt Time: Approximately 20 minutes
- Pour Style: Bottom-pour with adjustable flow valve
- Heat Control: Infinite heat control mounted away from pot heat
- Dimensions: 9 3/4 in H x 6 3/8 in W x 7 1/2 in D
- Warranty: 2-year manufacturer warranty
- Country of Origin: United States
What’s Included
- Lee Production Pot IV Melter (220V, 10 lb capacity)
- Bottom-pour spout with adjustable flow valve
Frequently Asked Questions
Does the Production Pot IV come with a plug on the cord?
No, this 220V export model ships without a plug on the electric cord. Since outlet styles differ from one country to the next, you attach the plug that matches your own 220V outlet. It's a quick job for most people or a local electrician.
Will this 220V Production Pot IV work on a standard US outlet?
No. This is the 220V model intended for countries where 220V is standard, so it will not run on a typical 110V US household outlet. If you're in the US, you'll want the 110V version instead.
What molds fit under the Production Pot IV spout?
The IV gives you a full 4 inches of clearance under the spout, double the 2 inches on the standard Production Pot. That's enough room to accept all brands of bullet molds and most sinker molds, which makes it handy for both bullet casting and tackle work like jigs and sinkers.
How long does the Lee Production Pot IV take to melt a full pot of lead?
Melt time runs about 20 minutes for a full pot. The 500-watt heating element pushes full power until the lead is melted, then the infinite heat control eases back to hold your casting temperature steady while you pour.





Reviews
There are no reviews yet.