Description
If you run a Lee progressive and want to add .30 M1 Carbine or .32 Auto to your loading bench, this is the plate that gets you there. The Breech Lock Pro Shell Plate #7 is the dedicated steel plate that holds and indexes those cases as the shellplate rotates through each station. It's a straight swap that opens up two cartridges a lot of folks find themselves wanting once they start shooting an M1 Carbine or a pocket .32.
What the Shell Plate #7 Handles
This one is spec'd for .30 M1 Carbine and .32 Auto (also listed as .32 ACP) cases. Each shell plate in the Lee lineup is cut for a specific rim diameter, so matching the right number to your cartridge is the whole game. The #7 is the correct plate for those two, and nothing else needs to be fudged to make it work.
Fitting the #7 to Your Press
This plate is built for the Lee Breech Lock Pro, Auto Breech Lock Pro, and Pro 4000 progressive presses. Worth knowing up front: these Pro-series plates are their own design and won't interchange with Pro 1000 or Load-Master plates, and those presses won't accept this one either. If you're running a Breech Lock Pro platform, you're in the right spot. Changeover is quick, which is the appeal of keeping a few plates on hand so you can jump between calibers without tearing anything down.
Why the Steel Build Matters
The #7 is machined from steel, which is what you want in a part that's constantly indexing loaded cases under the ram. It holds its tolerances, resists wear from repetitive cycling, and keeps your cases seated square at every station so your rounds come out consistent. For anyone loading volume on a progressive, that reliability is the point. Add it to your setup and you've got .30 Carbine and .32 Auto covered.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90647
- UPC: 734307906474
- Shell Plate Number: #7
- Compatible Cartridges: .30 M1 Carbine, .32 Auto (.32 ACP)
- Material: Steel
- Compatible Presses: Lee Breech Lock Pro, Auto Breech Lock Pro, Pro 4000
- Type: Progressive Press Shell Plate
- Shipping Weight: 0.265 lbs
What’s Included
- One Lee Precision Breech Lock Pro Shell Plate #7
Frequently Asked Questions
Which cartridges does the Breech Lock Pro Shell Plate #7 work with?
The #7 is set up for .30 M1 Carbine and .32 Auto, also listed as .32 ACP. Lee cuts each plate for a specific rim size, so this is the correct plate when you're loading either of those cartridges.
Will this shell plate fit my Lee Pro 1000 or Load-Master press?
No. This is a Pro-series plate made for the Lee Breech Lock Pro, Auto Breech Lock Pro, and Pro 4000. Those Pro-series presses only accept this style of plate, and the Pro 1000 and Load-Master use their own separate plates that aren't interchangeable.
Is the #7 shell plate made of steel?
Yes, it's machined from steel. That holds up well to the constant indexing and case handling a progressive press puts it through, keeping cases seated square at each station over long loading sessions.
Do I need a different plate for each caliber I load?
Generally yes, since each plate is matched to a cartridge rim diameter. The #7 covers .30 M1 Carbine and .32 Auto, so keeping a few plates on hand lets you switch calibers quickly without reworking the whole press.




Reviews
There are no reviews yet.