Description
Dialing in seating depth is where good handloads turn into great ones, and the Lee Precision Micrometer Bullet Seater Die (model 92220) makes that part of the process about as easy as it gets. Built for .223 Remington and 5.56 NATO (it also handles 223 Ackley Improved), this die takes the guesswork out of chasing consistent overall length so your rounds come off the press the same, every single time.
What Sets the 92220 Micrometer Seater Apart
The heart of this die is dead length seating. When set up that way, the body contacts the shell holder, which locks in uniform seating depth from the first round to the last. A floating bullet guide holds the case mouth and bullet in alignment, and Lee's own testing points to this sliding guide design producing cartridges with the lowest bullet runout. The guide is also built with radial clearance so the case, guide, and seater screw line themselves up naturally.
Micrometer Adjustment You Can Trust
The laser engraved micrometer thimble reads in divisions of one thousandth of an inch, just like a precision depth micrometer. There are no clicks to count or detents to fight, just smooth, infinitely adjustable movement. Write down your setting, back it off, and come right back to it later without burning through test rounds to find your sweet spot again.
A Seating Stem Built for Any Bullet
The seating stem is machined and burnished to seat nearly any point style bullet without marking or damaging the nose, so whether you're loading flat base, boat tail, or polymer tips, you're covered. One handy bonus here is the reversible floating bullet guide. Unthread it and reinstall it the other way and you can seat and crimp in a single operation, which is a feature Lee calls its own. The die uses the standard 7/8-14 thread, so it drops right into Dillon, Hornady, Lyman, RCBS, and of course Lee presses.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92220
- UPC: 734307922207
- Caliber/Gauge: .223 Rem / 5.56 NATO (also 223 Ackley Improved)
- Die Style: Micrometer Bullet Seating Die
- Seating Type: Dead Length Seating
- Micrometer Divisions: 0.001 inch
- Thread Size: 7/8-14
- Bullet Guide: Floating, reversible for seat and crimp
- Color: Black/Clear
- Quantity: 1 die
- Shipping Weight: 0.585 lb
What’s Included
- Lee Precision Micrometer Bullet Seating Die (model 92220)
- Instructions
Frequently Asked Questions
Will the 92220 micrometer seater fit my press?
Yes, this die uses the standard 7/8-14 thread found on nearly all modern reloading presses. That means it threads right into Dillon, Hornady, Lyman, RCBS, and Lee presses without any adapters. If your press takes common single-stage or progressive dies, you're good to go.
Can this die seat and crimp at the same time?
It can. The floating bullet guide is reversible, so you simply unthread it and reinstall it the other way to seat and crimp in one operation. That said, many precision reloaders prefer to seat and crimp as separate steps using a dedicated crimp die for the best consistency.
Does the micrometer seater work with 5.56 NATO and 223 Ackley Improved too?
Yes. The 92220 is rated for .223 Remington, 5.56 NATO, and 223 Ackley Improved cartridges. Since it's a seating die, it handles overall length for all three the same way, as long as your brass is already sized for the chamber you're loading.
What kind of bullets can the seating stem handle?
The seating stem is machined and burnished to seat nearly any point style bullet without marking or damaging the nose. That covers flat base, boat tail, and most polymer tip designs you'd run in a .223. It's a versatile setup that keeps your bullet tips clean through the seating process.




Reviews
There are no reviews yet.