Description
If you've ever counted turns on a stock Lee seater and still ended up guessing at your overall length, this little upgrade solves that. The Lee Precision Rifle Micrometer Adjust Screw replaces the original adjusting screw on any Lee bullet seating die and turns it into a repeatable, recordable tool. It's built for 34 caliber and smaller rifle cartridges that use the standard Lee bullet seating plug, so it covers a wide range of common rounds from .223 up through the popular 6.5 and .30 cal families.
The real draw here is resolution. Laser-engraved divisions each represent .001" (one thousandth of an inch), and an integrated friction ring replaces the old o-ring so there are no clicks to fight. That means you can split the thousandths and park the setting anywhere you like, then write it down and come right back to it the next time you load that load. Reloaders chasing a specific COAL for a given rifle have noted how much quicker it is to hit an exact number without the trial-and-error creep of a standard screw.
Why the Rifle Micrometer Adjust Screw Earns Its Spot
Setup takes seconds. You back the existing adjuster out, thread the micrometer in, and you're running. Because it swaps so easily, you can move one screw between dies, though plenty of folks just buy one for every seating die they own since they're priced to make that painless. The machining is clean with no slop or wobble, which is what makes the readings trustworthy from one session to the next.
Getting the Rifle Micrometer Adjust Screw Set Up Right
After threading it in a couple turns, you align the thimble to a horizontal line, then re-seat it with the zero lined up on the vertical mark and snug the acorn nut. From there it reads just like a depth micrometer. One thing to keep in mind: this screw is made for Lee bullet seating dies only and will not fit Dillon, RCBS, Hornady, or Redding dies.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 92215
- UPC: 734307922153
- Model: Micrometer Adjust Screw
- Type: Rifle Bullet Seating Die Adjust Screw
- Compatible With: 34 cal and smaller rifle cartridges
- Fits: Lee bullet seating dies
- Graduation: .001" per division, laser engraved
- Adjustment: Infinitely adjustable, integrated friction ring, no clicks
- Length: 4.95 in
- Weight: 0.11 lb
What’s Included
- Lee Precision Rifle Micrometer Adjust Screw (34 cal or smaller)
Frequently Asked Questions
What dies does the Rifle Micrometer Adjust Screw fit?
It fits Lee bullet seating dies for 34 caliber and smaller rifle cartridges that use the standard Lee bullet seating plug. You simply remove your existing adjusting screw and thread this one in its place. It will not work in Dillon, RCBS, Hornady, or Redding dies.
How fine can I adjust my seating depth with it?
Each laser-engraved division equals .001", one thousandth of an inch. Because it uses a friction ring instead of a click mechanism, you can set it between the markings and it will still hold, letting you split the thousandths for even finer control. You can record a setting and return to it exactly the next time you load.
Is it hard to install the micrometer adjust screw?
Not at all. You back the stock adjuster out, thread the micrometer in a couple turns, align the thimble to a horizontal line, then re-install it with the zero lined up on the vertical mark and snug the acorn nut. The whole swap takes just a minute and can be moved between dies whenever you need.
Will this work for larger calibers like 35 cal straight wall rounds?
This version is made for 34 caliber and smaller cartridges. For 35 cal straight wall rifle rounds, Lee offers a separate Large Caliber Rifle Micrometer Adjust Screw designed for that application. Match the screw to your cartridge and die to get a proper fit.




Reviews
There are no reviews yet.