0
0

Lee Carbide Factory Crimp Micrometer Seater Adapter 44/45 Cal #92162

UPC: 734307921620

$14.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Lee's Micrometer Seater Adapter is a smart little upgrade for anyone running a Carbide Factory Crimp Die in 44 or 45 caliber. Out of the box, the Carbide Factory Crimp Die only crimps and post-sizes the loaded round. Swap in this cartridge-specific adapter in place of the stock adjusting screw, and that same die now seats the bullet, crimps the case mouth, and runs the round back through the carbide sizing ring, all in one pull of the handle. For a progressive or turret press where every station counts, that is a real win.

What the 44/45 Seater Adapter Does Differently

The big draw here is dead-length seating. The adapter sets a hard stop for the bullet, so your seating depth stays consistent round after round instead of drifting. Because the die body never moves once it is set, you adjust crimp and seating independently without chasing the lock ring. The micrometer dial makes small, repeatable changes easy to track, which is exactly what you want when you are tuning a load or switching between bullet weights.

Fitment for the Lee Factory Crimp Adapter

This particular adapter (part #92162) covers a wide spread of big-bore revolver and auto rounds, including 44 Russian, 44 Special, 44 Remington Magnum, 45 Colt, 45 ACP, 45 Auto Rim, 45 GAP, 45 Win Mag, 454 Casull, and 460 S&W Magnum. It installs into the Lee Pistol Carbide Factory Crimp Die, not the standard seating die, so you will want to have that die on hand. The carbide sizing ring at the base of the die still does its job, correcting any case bulge so finished rounds chamber cleanly.

Setting Up the Micrometer Seater Adapter

Installation is about as simple as it gets. Remove the factory adjusting screw, thread in the adapter, and set your seating depth with the micrometer. From there you fine-tune the crimp without touching the die height. It is a quiet upgrade that makes an already dependable die easier to live with at the bench.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 92162
  • UPC: 734307921620
  • Type: Factory Crimp Micrometer Seater Adapter
  • Caliber/Gauge: 44/45 Cal
  • Compatible Cartridges: 44 Russian, 44 Special, 44 Rem Mag, 45 Colt, 45 ACP, 45 Auto Rim, 45 GAP, 45 Win Mag, 454 Casull, 460 S&W
  • Required Die: Lee Pistol Carbide Factory Crimp Die
  • Ammunition Type: Handgun
  • Adjustment: Micrometer bullet seating depth
  • Country of Origin: United States
  • Shipping Weight: 0.171 lb

What’s Included

  • Lee 44/45 Cal Factory Crimp Micrometer Seater Adapter (#92162)

Frequently Asked Questions

Does the Micrometer Seater Adapter work on its own or do I need another die?

The adapter is not a standalone die. It installs into the Lee Pistol Carbide Factory Crimp Die in place of the stock adjusting screw. Once fitted, that die handles seating, crimping, and post-sizing in one step.

What calibers does the 44/45 adapter actually cover?

This #92162 version fits a broad range of big-bore cartridges, including 44 Russian, 44 Special, 44 Remington Magnum, 45 Colt, 45 ACP, 45 Auto Rim, 45 GAP, 45 Win Mag, 454 Casull, and 460 S&W Magnum. It is cartridge-group specific, so make sure your round falls in the 44/45 family before ordering.

What is dead-length seating and why does it matter?

Dead-length seating means the adapter sets a fixed stop for the bullet, so your seating depth stays consistent from round to round rather than drifting. That consistency helps keep your overall length and pressure behavior repeatable. It is especially handy when you are tuning a load or loading large batches.

Why would I want this on a progressive or turret press?

Because the adapter lets one die seat, crimp, and post-size at once, it frees up a station you would otherwise spend on a separate seating die. On presses where station count is limited, that extra room is valuable. You also get to adjust crimp without ever moving the die body.

Additional information

UPC

734307921620

Manufacturer

Manufacturer Part Number

92162

Caliber/Gauge

44/45 Cal

Shipping Weight

0.171

Reviews

There are no reviews yet.

Be the first to review “Lee Carbide Factory Crimp Micrometer Seater Adapter 44/45 Cal #92162”