Description
The Lee Precision Deluxe Carbide 4-Die Set takes the brand's popular carbide three-die setup and adds the Carbide Factory Crimp Die, giving you a complete pistol die package for the .45 Colt. You get four dies that handle every step of loading a straight-wall revolver round: a carbide full-length sizing die, a powder-through expanding die, a bullet seating die, and the factory crimp die. It's a well-rounded set for anyone running a single stage or turret press who wants consistent, dependable ammo without a lot of fuss.
The big perk of carbide is in the sizing die. Because the sizing ring is made of tungsten carbide, you skip the messy case lube step that steel dies require, which saves time and keeps your brass and your bench cleaner. The dies thread in at the standard 7/8-14 size, so they drop into just about any common press from Lee, Dillon, Hornady, Lyman, or RCBS. Lee is known for holding tight tolerances on their dies, and reloaders consistently note how easy these are to set up and adjust.
Why the Deluxe 45 Colt Die Set Runs a Separate Crimp Step
Separating the seating and crimping into two operations is the real upgrade over a three-die set. It simplifies your adjustments because you aren't trying to dial in bullet depth and crimp tension at the same time. The Carbide Factory Crimp Die also post-sizes the finished round, so anything that passes through it is going to chamber cleanly in your revolver. For heavy-recoiling loads, that firm crimp helps keep bullets from walking under recoil.
Loading More Than Just 45 Colt
If you shoot a 454 Casull, this set has you covered too. The same dies can be used to load that cartridge, which makes it a flexible choice for folks running big-bore revolvers. Everything arrives packed in Lee's flat four-die box with an air-tight cover that keeps the machined dies protected on the shelf between loading sessions.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90967
- UPC: 734307909673
- Caliber: .45 Long Colt
- Die Type: 4-Die Set
- Set Type: Deluxe Pistol
- Material: Carbide
- Thread Size: 7/8-14
- Shell Holder: Included
- Also Loads: 454 Casull
- Length: 5.85 in
- Shipping Weight: 1.4 lbs
What’s Included
- Carbide full-length sizing die
- Powder-through expanding die
- Bullet seating die
- Carbide factory crimp die
- Universal shell holder
- Powder dipper
- Instructions with load data
Frequently Asked Questions
Do I need case lube with the Lee 45 Colt carbide die set?
No, you can skip the lube on sizing. The carbide sizing ring lets you resize .45 Colt brass dry, which saves time and keeps your cases and press cleaner. You only lube if you're doing something outside the normal sizing operation.
Will these dies fit my press?
Yes, as long as your press takes standard dies. The Lee Deluxe 4-Die Set uses the common 7/8-14 thread, so it fits most popular presses including Lee, Dillon, Hornady, Lyman, and RCBS.
What makes the Deluxe 4-die set different from the 3-die set?
The Deluxe set adds the Carbide Factory Crimp Die, splitting seating and crimping into two separate steps. That makes your adjustments easier and the crimp die post-sizes the finished round so it chambers reliably. The three-die set handles crimp during the seating step instead.
Can this set load 454 Casull besides 45 Colt?
Yes. The same dies in this set can be used to load 454 Casull in addition to .45 Colt, which makes it handy if you run a big-bore revolver chambered for both.




Reviews
There are no reviews yet.