Description
Reloaders chasing tighter groups out of their .22-250 know that how you size your brass matters just as much as the load itself. The Lee Precision Collet Neck Sizer Die takes a different approach than a standard full-length die. Instead of working the whole case, it uses a steel collet to squeeze the case neck against a precision mandrel, which gives you a straight, concentric neck and keeps bullet runout to a minimum. The result is ammo that chambers consistently and tends to shoot better, especially out of a bolt gun that gets fed brass fired in the same chamber every time.
How the .22-250 Collet Neck Sizer Works
This is a neck-only sizing die, so it leaves the case body fire-formed to your rifle's chamber. That snug fit is a big part of why neck-sized brass lasts so much longer than full-length sized brass, with case life often stretching several times further before you have to retire a piece. Because it sizes with a collet and mandrel rather than a tight ring and expander ball, there's no need for case lube, which keeps your brass clean and saves you a step on the bench. It also runs on standard 7/8-14 threads, so it drops right into any common single-stage or turret press.
Getting the Most From the Lee Collet Die
For the best accuracy, a lot of handloaders seat their bullets out far enough to touch or nearly touch the rifling. That gives you the shot-start pressure you'd normally rely on a crimp for, and it pairs naturally with the consistent neck tension the collet produces. One thing worth keeping in mind is that neck-sized brass is meant to go back into the rifle that fire-formed it, so this die shines for folks loading dedicated brass for one .22-250.
This is the die only, so if you need bullet seating as well, you'd pair it with a seating die or step up to a complete collet set. For reloaders who already have the rest of their process dialed in and want to add real precision to their neck sizing, this is a simple, no-lube way to get there.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90955
- Model: 90955
- UPC: 734307909550
- Caliber: .22-250 Remington
- Product Type: Collet Neck Sizing Rifle Die
- Die Function: Neck sizing only
- Lubrication: No case lube required
- Thread Size: 7/8-14
- Material: Steel
- Quantity: 1 die
- Country of Origin: United States
What’s Included
- Lee Precision Collet Neck Sizer Die (.22-250 Remington)
- Storage box
Frequently Asked Questions
Does the Lee Collet Neck Sizer Die need case lube?
No, it does not. The collet squeezes the neck against a mandrel rather than forcing the case through a tight sizing ring, so you can skip the lube entirely. That keeps your brass cleaner and cuts a step out of your reloading routine.
Is this a complete die set or just the sizing die?
This is the die only. It handles neck sizing, so if you want to seat bullets you'll need to add a seating die or move up to a full collet die set. Part number 90955 is the same collet die used in the Lee .22-250 collet 2-die set.
Why does neck sizing extend brass life compared to full-length sizing?
Because the collet die only works the neck, the case body stays fire-formed to your chamber and isn't repeatedly stretched and resized. Neck-sized cases can last several times longer than full-length sized brass before they need to be retired. The tradeoff is that the brass should be used in the same rifle that fire-formed it.
Will this die fit my press?
Yes, it uses standard 7/8-14 threads, so it fits common single-stage and turret presses. It also takes very little force to operate, which is easy on both the press and your arm. Just set it up per the included instructions for your preferred neck tension.



Reviews
There are no reviews yet.