Description
If you cast your own bullets, sinkers, or ingots, the Lee Magnum Melter is one of those tools that just gets the job done without a lot of fuss. It uses a large 4-inch diameter pot that holds up to 20 pounds of lead, which gives you plenty of room to work a ladle and keeps you from stopping to refill in the middle of a long session. Running on standard 110-volt household power, it pulls 700 watts through a tubular heating element and brings a cold pot up to casting temperature in less than 20 minutes.
What Sets the Lee Magnum Melter Apart
This is a dedicated ladle-casting pot, not a bottom-pour furnace. That open, wide-mouth design is exactly what you want when you're dipping with a larger ladle, since there's no spout or valve to clog, and cleanup stays easy. It carries the same high-efficiency pot design that made Lee's melting pots a shop favorite, so melt times stay predictable and the thermostat holds your working temperature steady. The pot is capable of reaching up to 900 degrees Fahrenheit, which covers pretty much any common lead alloy you'd run for casting.
Putting the Magnum Melter to Work
Folks pouring fishing sinkers, scuba weights, and cast bullets tend to reach for this one because the big opening pairs so well with a heavy cast-iron dipper like Lee's No. 1905 ladle. It's lightweight and easy to move around the bench or garage, and since it runs on regular wall current you don't need any special wiring. For anyone wanting the capacity and heating efficiency of a larger Lee pot while sticking with ladle casting, the Magnum Melter hits a nice sweet spot between capacity, speed, and simplicity.
Lee backs the Magnum Melter with a solid manufacturer warranty, which is part of why it has such a loyal following among casters who run it hard season after season. Pair it with a good ladle and a mold, and you've got a straightforward setup that'll keep producing for years.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90949
- UPC: 734307909499
- Product Type: Electric Melter
- Capacity: 20 lbs
- Pot Diameter: 4 inches
- Wattage: 700 watts
- Voltage: 110 Volt
- Melt Time: Less than 20 minutes
- Max Temperature: 900 degrees Fahrenheit
- Casting Style: Ladle casting (no bottom pour)
- Pot Material: Carbon steel
- Finish: Silver
- Caliber/Gauge: All
- Quantity: 1
What’s Included
- Lee Magnum Melter Furnace (90949)
Frequently Asked Questions
Is the Lee Magnum Melter a bottom-pour pot?
No, the Magnum Melter is built strictly for ladle casting and does not have a bottom-pour spout or valve. The wide 4-inch pot opening is designed to give you easy access with a ladle or dipper. If you need bottom-pour capability, you'd want to look at a different model in the Lee lineup.
How long does the Lee Magnum Melter take to melt lead?
The 700-watt tubular heating element brings a full pot up to casting temperature in less than 20 minutes from a cold start. It can reach up to 900 degrees Fahrenheit, which is hot enough for the common lead alloys used in bullet and sinker casting. A calibrated thermostat then helps hold your working temperature steady.
What power does the Magnum Melter need to run?
It runs on standard 110-volt household current, so you can plug it into a regular wall outlet with no special wiring. That makes it easy to use on a reloading bench, in a garage, or anywhere you have a normal outlet.
Can I use the Lee Magnum Melter for casting fishing sinkers?
Absolutely. The large pot and 20-pound capacity make it popular for pouring fishing sinkers, scuba and dive weights, and ingots, in addition to cast bullets. The big opening works especially well with a heavy cast-iron ladle for dipping out molten lead.




Reviews
There are no reviews yet.