0
0

Lee Precision Pro 4-20 Lead Melter 110V 20 lb Bottom Pour Pot

UPC: 734307909475

$83.99

155 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision Pro 4-20 is a bottom-pour electric melter built for folks who cast in volume, whether that's pistol boolits, rifle bullets, or fishing sinkers. The large-diameter carbon steel pot holds roughly 20 pounds of lead, and the 700-watt tubular heating element brings it up to pouring temperature quickly with solid thermal recovery between casts. You've got adjustable heat control that runs from about 450 to 900 degrees Fahrenheit, so you can dial in the right temp for clean fill-out. A good starting point for most casting is around 650 degrees.

What Sets the Pro 4-20 Apart

The big draw here is the clearance under the spout, roughly 4 inches, which leaves room for just about every brand of bullet mold and most sinker molds. The front-mounted micro-adjustable flow control valve lets you fine-tune your pour speed with a simple twist of a screwdriver, and the replaceable valve spout reseats just as easily if it ever needs attention. An adjustable mold guide helps you line up your mold the same way every time, which matters when you're running batch after batch.

Built to Keep Running

This is the second-generation design, so it carries over Lee's patented high-efficiency setup along with a dependable remote sensing thermostat tucked into a dust-tight housing. That housing keeps casting grime out of the electronics, which is a nice touch for a tool that lives in a dusty corner of the workshop. It all sits on a sturdy metal base that keeps things stable when you're working with a full pot of molten lead.

Between the generous capacity, the fast melt time, and the adjustable bottom-pour setup, the Pro 4-20 earns its keep for anyone casting their own projectiles or pouring tackle. It's a tool a lot of casters reach for first and keep around for years.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90947
  • UPC: 734307909475
  • Product Type: Electric Bottom-Pour Lead Melter
  • Capacity: Approx. 20 lbs of lead
  • Voltage: 110V
  • Heating Element: 700-watt tubular
  • Temperature Range: 450 to 900 degrees Fahrenheit
  • Spout Clearance: Approx. 4 inches under spout
  • Pot Interior: 4 in. x 4 in. carbon steel
  • Thermostat: Remote sensing, dust-tight housing
  • Flow Control: Micro-adjustable valve, replaceable spout
  • Caliber/Gauge: All
  • Quantity: 1

What’s Included

  • Lee Precision Pro 4-20 electric lead melter (110V)
  • Adjustable mold guide
  • Instructions

Frequently Asked Questions

How much lead does the Pro 4-20 hold?

The Pro 4-20 holds approximately 20 pounds of lead in its large-diameter carbon steel pot. That high capacity means fewer refills and more time casting when you're working through a big batch of bullets or sinkers.

Is the Lee Pro 4-20 a bottom-pour melter?

Yes, it's a bottom-pour design with a front-mounted, micro-adjustable flow control valve. You can fine-tune the pour speed with a twist of a screwdriver, and the valve spout is replaceable and reseats easily if needed.

What temperature does the Pro 4-20 reach?

It reaches between roughly 450 and 900 degrees Fahrenheit with adjustable heat control. Most casters start around 650 degrees and adjust from there to get good fill-out at the lowest workable temperature.

Will the Pro 4-20 fit my bullet molds?

There's about 4 inches of clearance under the spout, which accepts all brands of bullet molds and most sinker molds. The included adjustable mold guide also helps you position any mold quickly and consistently for pouring.

Additional information

UPC

734307909475

Manufacturer

Manufacturer Part Number

90947

Caliber/Gauge

All

Capacity

20 lbs

Color

110V-700 WATT

Length

10.6500

Product Type

Electric Melter

Quantity

1

Shipping Weight

4.1

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Pro 4-20 Lead Melter 110V 20 lb Bottom Pour Pot”