Description
The .500 S&W Magnum is a beast to reload, and bullet jump is a real headache when you're running stout loads through a big revolver. The Lee 90931 Collet Crimp Die is purpose-built to solve that. It uses a collet to apply a rifle-style crimp that squeezes the case mouth into the bullet from the sides, giving you a rock-solid hold that keeps bullets seated shot after shot. If you've dealt with bullets creeping out under heavy recoil, this is the fix that reloaders keep coming back to for this caliber.
How the Lee Collet Crimp Die Handles the .500 S&W
What sets this die apart is the way it crimps. Instead of pushing down on the case like a conventional seater or roll crimp, the collet applies lateral pressure. The bottom of the die contacts the shell holder and the collet fingers press inward, forming the crimp. That means it isn't fussy about case length the way a roll crimp is, so your crimps come out consistent even across mixed brass. One nice bonus is that your bullets don't need a pre-cut cannelure. The collet is strong enough to form its own crimp groove right into the bullet, which opens up your options on projectile selection.
Setting Up Your 90931 Crimp Die
Setup is about as simple as reloading gets. Most folks run the loaded case up to the top of the press stroke and thread the die down until it just contacts the case mouth, then snug from there to dial in the crimp they want. Because the collet does the work, you get repeatable results once it's set. This is a single die, so it pairs with your existing seating and sizing dies rather than replacing a full set. It uses the standard 7/8-14 thread, so it drops right into any common single-stage, turret, or progressive press.
This die is made of high-quality steel and is not carbide, which is completely normal for a crimp-only die since no case lube or resizing happens at this stage. For anyone loading warm .500 S&W Magnum ammo and wanting dependable, repeatable crimps, it's a small tool that earns its keep on the bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90931
- UPC: 734307909314
- Caliber: .500 S&W Magnum
- Die Type: Collet Style Crimp Die
- Dies in Set: 1
- Thread Size: 7/8-14
- Material: Steel (not carbide)
- Shell Holder Included: No
- Length: 4.8 in
- Shipping Weight: 0.25 lbs
What’s Included
- Lee 90931 Collet Style Crimp Die
- Storage box
- Instructions
Frequently Asked Questions
Do bullets need a cannelure to use the Lee 90931 collet crimp die?
No, they don't. The collet in this die is powerful enough to form its own crimp groove right into the bullet as it crimps. That gives you more freedom to load jacketed or cast bullets that didn't come with a factory crimp groove.
Is the Lee 90931 collet crimp die carbide?
No, this die is made of steel and is not carbide. That's perfectly normal for a dedicated crimp die since there's no resizing happening at this stage, so no case lube is needed. The steel collet is plenty strong for crimping tough .500 S&W Magnum cases.
How is a collet crimp different from a roll crimp?
A collet crimp applies pressure to the case mouth from the sides rather than pushing down the way a roll crimp does. The upside is that it isn't sensitive to case length, so your crimps stay uniform even with mixed-length brass. Many .500 S&W reloaders prefer it specifically because it holds bullets firmly against heavy recoil.
Does the Lee 90931 replace my full die set?
No, this is a single, standalone crimp die. You'll still use your sizing and seating dies to prep and seat bullets, then run the round through this die as a separate crimping step. It uses the standard 7/8-14 thread so it fits common single-stage, turret, and progressive presses.




Reviews
There are no reviews yet.