Description
The .460 S&W Magnum is a brute of a cartridge, and anyone who has loaded for it knows how important a solid crimp is when you're dealing with that much recoil and pressure. The Lee Precision 90926 Collet Crimp Die was built specifically to tame that round. Instead of relying on the brass itself to hold the bullet with a roll or taper crimp, this die uses a collet that squeezes the case mouth against the bullet, applying a rifle-style crimp that keeps everything seated right where you want it.
What Sets the Lee 90926 Collet Crimp Die Apart
The collet design is the big story here. As it closes down, it grips the case and forms a crimp so firm it can create its own groove, which means you don't need a bullet with a cannelure or crimp groove to get a clean, repeatable hold. That's a real advantage with the .460 S&W, where heavy bullets under stiff recoil want to walk forward in the cylinder. A good crimp also raises the pressure needed to get the bullet moving, which tends to smooth out your pressure curve and tighten up velocity spread from shot to shot.
Fitment and Setup for the .460 S&W Collet Die
This is a single die with standard 7/8-14 threads, so it drops into any common reloading press or turret. It runs as a separate finishing step after seating, letting you dial in your crimp independently for better consistency. Keep in mind this die is steel rather than carbide, which is normal for a dedicated crimp die since it isn't resizing the case body.
Built the Way Lee Precision Has Done It Since 1958
Lee has a long reputation for making reloading gear that performs without draining your wallet, and this crimp die fits right into that tradition. It's cast, machined, and assembled in the USA. Reloaders who run it tend to point out how much cleaner and more visible the crimp looks compared to what you get from a standard seat-and-crimp step, and that it simply gets the job done without fuss on a cartridge that's otherwise a pain to crimp well.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90926
- Model: Collet Style Crimp Die
- UPC: 734307909260
- Caliber: .460 S&W Magnum
- Die Type: Crimp
- Die Series: Collet
- Crimp Style: Rifle-style collet crimp
- Dies In Set: 1
- Thread Size: 7/8-14
- Material: Steel (non-carbide)
- Gun Type: Handgun
- Length: 4.75 in
- Country of Origin: USA
What’s Included
- Lee Precision 90926 Collet Style Crimp Die (.460 S&W Magnum)
Frequently Asked Questions
Do bullets need a crimp groove to use the Lee 90926 collet crimp die?
No, and that's one of the best things about it. The collet squeezes with enough force to form its own crimp groove, so you can run bullets with or without a cannelure. This makes it handy if you're loading a variety of projectiles for your .460 S&W.
Is the Lee 90926 a carbide die?
No, this is a steel die, not carbide. That's standard for a dedicated crimp die since it isn't resizing the case body, just forming the crimp at the case mouth. You won't need carbide for a die that only handles the crimping step.
Will the 90926 collet crimp die fit my press?
Yes, it uses standard 7/8-14 threads, so it fits virtually any single stage, turret, or progressive press that accepts common reloading dies. It's a single die meant to be used as a separate crimping step after seating your bullet.
Why use a collet crimp die for the .460 S&W Magnum?
The .460 S&W is a high-pressure, hard-recoiling round, so bullets can creep forward in the cylinder without a strong crimp. The collet applies a firm, uniform crimp that holds the bullet securely and helps build more consistent start pressure. That translates to tighter velocity spreads and better accuracy on a cartridge that's notoriously tricky to crimp well.




Reviews
There are no reviews yet.