0
0

Lee Precision 90891 Bullet Feed Kit Die & Fingers 45 Cal .50-.67in

UPC: 734307908911

$10.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you already run a Lee Bullet Feed Kit and you've switched over to loading .45, this is the piece that makes the swap. The Lee Precision 90891 is a caliber-specific feed die paired with the matching feed fingers, machined to grab and guide .45 caliber bullets straight down into the mouth of your seating die. It's built for projectiles that measure between .50 and .67 inches in overall length, which covers a good chunk of common .45 ACP and .45 Colt bullet profiles.

What the 90891 Die and Fingers Actually Does

The whole idea behind a bullet feeder is cutting out the step where you hand-place every bullet on top of a charged case. The feed fingers pull a bullet from the bottom of the stack and hold it in position, then release it right as the case rises to meet it. The die itself threads into a standard station on your press, and the opening is sized so the bullet drops freely without tipping. That consistent alignment means fewer crushed cases and a smoother rhythm once you get into a groove.

Matching the 90891 to Your Press and Bullets

This set is made to work with the Lee Pro 1000 and Load-Master, and it also plays nice with the Auto Breech Lock Pro and newer kits in that family. A quick tip from folks who run these: measure your actual bullet from base to tip and pick the feed die opening that's just a touch longer than the projectile. Too long of an opening and you'll start seeing bullets tip on the way out, so this .50 to .67 window is the sweet spot for most standard .45 loads.

Why Reloaders Keep a Spare Handy

Because each caliber and bullet length needs its own feed die and fingers, loaders who shoot more than one caliber tend to grab the right set for each. The 90891 keeps your .45 bench fully automated so you're not slowing down to seat bullets by hand. It's a simple part that makes a real difference in how fast and consistent your sessions run.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90891
  • Model: Bullet Feed Kit
  • UPC: 734307908911
  • Caliber: 45 Cal
  • Product Type: Feed Die & Fingers
  • Bullet Length Range: .50 in to .67 in
  • Function: Automatic bullet feeding
  • Compatible Presses: Lee Pro 1000, Load-Master, Auto Breech Lock Pro
  • Finish: Black
  • Quantity: 1 Kit

What’s Included

  • Bullet feed die (45 cal, .50 to .67 long opening)
  • Bullet feed fingers

Frequently Asked Questions

What does the Lee 90891 feed die and fingers do?

This set converts your existing Lee Bullet Feed Kit over to run .45 caliber bullets. The fingers grab a bullet from the bottom of the stack and hold it in place, while the die guides it down into the case mouth as the ram rises. It automates the bullet-placement step so your progressive press runs faster and more consistently.

Which presses work with the 90891 bullet feed die?

It's designed for the Lee Pro 1000 and Load-Master, and it also works with the Auto Breech Lock Pro and newer kits in that lineup. You'll need to already have the Lee Bullet Feed Kit installed, since this is the caliber-specific accessory that drops into that system rather than a complete standalone feeder.

How do I know if my .45 bullets fit the .50 to .67 length range?

Measure your projectile from base to tip with calipers. You want a feed die opening that's just slightly longer than the bullet, so this .50 to .67 inch window covers most standard .45 ACP and .45 Colt profiles. If the opening is too long for your bullet, you'll start to see tipping and misfeeds, so matching the length matters.

Is the 90891 a complete bullet feeder or just the conversion parts?

This is the conversion kit, which includes the feed die and the matching fingers for .45 caliber. It's meant to adapt a Bullet Feed Kit you already own to a different caliber or bullet length, not replace the whole feeder assembly. If you don't already have the base bullet feed kit, you'd want the full kit instead.

Additional information

UPC

734307908911

Manufacturer

Manufacturer Part Number

90891

Caliber/Gauge

45 Cal

Product Type

Feed Die & Fingers

Quantity

1 Kit

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 90891 Bullet Feed Kit Die & Fingers 45 Cal .50-.67in”