0
0

Lee Precision Factory Crimp Die 7mm STW / 7mm RUM (90869)

UPC: 734307908690

$11.99

18 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This Lee Precision Factory Crimp Die is built specifically for 7mm STW and 7mm Remington Ultra Magnum handloads, and it's a smart add to any press if you want that last bit of consistency out of your big magnum rounds. It's a single die that applies a firm, factory-style crimp as a separate step after seating, which lets you dial in bullet tension without fighting your seater adjustment at the same time.

How the 7mm STW / 7mm RUM Factory Crimp Die Works

Being a bottleneck rifle cartridge, this die uses a collet, not a carbide sizing ring. As the shell holder pushes the case up into the die, a set of fingers closes in horizontally on the case mouth and squeezes the brass into the bullet from four points around the neck. That sideways action is why it's nearly impossible to buckle a case the way a traditional roll crimp sometimes will, and it's also why your bullets don't need a cannelure or crimp groove to get a solid, uniform hold.

One of the real perks here is that case trim length isn't critical. Because the collet works off the shell holder and crimps horizontally, small variations in case length won't change your crimp the way they would with a seat-and-crimp setup. You still want to keep your brass under max length for safety, but you're not chasing a dead-even trim just to get a consistent crimp.

Why Reloaders Reach for the Lee Factory Crimp Die

A firm crimp raises the pressure needed to start the bullet moving, which tends to even out your pressure curve and tighten velocity spread. For heavy-recoiling cartridges like the 7mm STW and 7mm RUM, that firm bullet hold also helps keep bullets from walking under recoil in the magazine. The crimp is user adjustable with a simple screw, so you can run anything from a light touch to a heavier crimp depending on your load and bullet. It threads into any standard 7/8-14 press, making it an easy fit alongside your existing die set.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90869
  • UPC: 734307908690
  • Product Type: Factory Crimp Rifle Die
  • Caliber: 7mm STW / 7mm RUM
  • Crimp Style: Collet (four-finger)
  • Thread: 7/8-14
  • Crimp Adjustment: User adjustable via screw
  • Country of Origin: United States

What’s Included

  • Lee Factory Crimp Die for 7mm STW / 7mm RUM
  • Instruction sheet

Frequently Asked Questions

Is the 7mm STW / 7mm RUM Factory Crimp Die carbide?

No. This is a bottleneck rifle die, so it uses a collet to apply the crimp rather than a carbide sizing ring. The carbide Factory Crimp Dies are the straight-wall pistol versions; rifle calibers like the 7mm STW and 7mm RUM get the collet design.

Do my bullets need a cannelure or crimp groove to use this die?

Not at all. The collet squeezes the case mouth into the bullet from four points, so it forms its own hold even on smooth-sided bullets without a crimp groove. That makes it handy for a wide range of jacketed bullets in your 7mm STW or 7mm RUM loads.

Does case length have to be perfect to get a good crimp?

Case trim length isn't critical with this die because the collet crimps horizontally off the shell holder, so small length differences won't throw off your crimp. Just keep your brass under the maximum case length for safety, and you'll get consistent results without obsessing over a dead-even trim.

Will this die fit my reloading press?

Yes. It uses the standard 7/8-14 die thread, so it drops into just about any single-stage or turret press on the market. It's meant to be used as a separate crimping step after you've seated your bullets.

Additional information

UPC

734307908690

Manufacturer

Manufacturer Part Number

90869

Caliber/Gauge

7mm RUM

Product Type

Factory Crimp Rifle Die

Shipping Weight

0.4125

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Factory Crimp Die 7mm STW / 7mm RUM (90869)”