Description
If you load .38 Super or .38 ACP on a progressive or single-stage press, this little die earns its spot in the station every time. The Lee Carbide Factory Crimp Die separates seating and crimping into their own steps, which takes the guesswork out of die setup and keeps your seating depth consistent round after round. As the case runs up into the die, a carbide ring at the base post-sizes any part of the brass that drifted past factory new dimensions, then a taper crimp gets applied on the way through. The result is ammo that chambers freely and feeds like the factory stuff.
What the .38 Super Carbide Factory Crimp Die Does Differently
Most crimp dies make you sweat case length. This one does not. Because it sizes the cartridge as it crimps, trim length stops being critical, so you can skip a lot of the measuring, trimming, and chamfering that eats up bench time. The carbide ring means no lubrication is needed, and the design makes it tough to over-crimp or buckle a case the way you might with a seating die doing double duty. For auto-loader rounds like .38 Super, that clean taper crimp also protects proper headspace at the case mouth.
Dialing In the 90866 Factory Crimp Die
Setup is quick. The adjusting screw sets your crimp amount, and a finger-adjustable floating crimp ring helps you land that perfect crimp without fuss. A firm, uniform crimp does more than hold the bullet in place. It helps build consistent start pressure, which smooths out your pressure curve and tightens up velocity spreads for better accuracy downrange.
Lee dies use the standard 7/8-14 thread, so this one threads right into Dillon, Hornady, RCBS, Lyman, and of course Lee presses. It also handles related cartridges like 9mm Largo and 9×23, making it a handy piece if you run more than one of those rounds. Made in the USA and built to the quality Lee reloaders have counted on for years.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90866
- UPC: 734307908669
- Caliber: .38 Super Auto / .38 ACP
- Product Type: Carbide Factory Crimp Pistol Die
- Crimp Style: Taper Crimp
- Thread Size: 7/8-14
- Sizer Material: Carbide
- Lubrication Required: None
- Also Fits: 9mm Largo, 9×23
- Country of Origin: United States
- Shipping Weight: 0.4 lbs
What’s Included
- Carbide Factory Crimp Die (.38 Super / .38 ACP)
- Plastic storage case
- Instructions
Frequently Asked Questions
What kind of crimp does the Lee .38 Super Factory Crimp Die apply?
It applies a taper crimp, which is the correct style for rimless auto-loader cartridges like .38 Super and .38 ACP. The adjusting screw lets you set exactly how much crimp you want. The design also keeps the case mouth from being crimped too far down, which helps the round headspace properly.
Do I need to lube my cases when using this die?
No lubrication is required. The carbide ring in the base handles the post-sizing without any lube, which keeps your loading process cleaner and faster. That is one of the perks of the carbide version over a plain steel sizer.
Will this die fit my press?
Yes, it uses the standard 7/8-14 thread found on modern reloading presses, so it works with Dillon, Hornady, RCBS, Lyman, and Lee machines. It drops right into a progressive as a dedicated crimp station or works fine on a single-stage setup.
Does case length matter with the Factory Crimp Die?
Trim length is not critical with this die because it sizes the cartridge as it crimps. That means you can skip a lot of the measuring and trimming steps that other crimp methods demand. It saves real time on the bench without sacrificing consistency.





Reviews
There are no reviews yet.