Description
If you reload .45 ACP, this is the die that makes your rounds chamber like factory ammo. The Lee Carbide Factory Crimp Die does two jobs in one pull of the handle: it applies a clean taper crimp to lock the bullet in place, and it post-sizes the finished round with a carbide ring so any bulge or oversize case gets squeezed back down to spec. The result is ammo that drops freely into your 1911, your double-stack, or a chamber gauge without a fight.
What the Lee .45 ACP Carbide Factory Crimp Die Does Differently
Most crimp happens during bullet seating, which can be fussy and inconsistent. This die separates crimping into its own step and adds that carbide sizing pass on the way out. That second feature is the one reloaders rave about. Plenty of folks grab this die specifically to fix rounds that wouldn't chamber, running them through and watching them drop in clean afterward. It's the same carbide ring used in Lee's Bulge Buster setup, so it earns its keep on brass that's been fired in loose or unsupported chambers.
Setting Up the Carbide Factory Crimp Die
An adjusting screw lets you dial in exactly how much crimp you want, and it's a quick setup once you find your sweet spot. Lee's own testing points to a factory crimp producing a more uniform pressure curve, which can tighten up accuracy. One of the nicer perks is that case trim length isn't critical with this die, so you skip the tedious trimming and chamfering step that other crimping methods demand.
While it's marked .45 ACP, this die also handles .45 Auto Rim, .45 Winchester Magnum, and .45 GAP, which makes it a flexible addition if you load more than one of the big-bore forty-fives. It's a single die that threads into any standard 7/8-14 press, and it plays nice with progressive and single-stage setups alike. For high-volume pistol loaders, it's one of those tools that quietly solves the chambering headaches before they start.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90864
- UPC: 734307908645
- Caliber: .45 ACP
- Also Fits: .45 Auto Rim, .45 Winchester Magnum, .45 GAP
- Product Type: Factory Crimp Pistol Die
- Crimp Style: Taper Crimp
- Sizing Ring: Carbide
- Dies In Set: 1
- Thread: 7/8-14 (standard)
- Length: 4.75 in
- Country of Origin: United States
What’s Included
- Lee Carbide Factory Crimp Die (.45 ACP)
- Instruction sheet
Frequently Asked Questions
Does the Lee Carbide Factory Crimp Die for .45 ACP apply a taper or roll crimp?
For the .45 ACP, this die applies a taper crimp, which is the correct style for rimless autoloader cartridges. Lee uses taper crimps on its auto pistol dies and reserves roll crimps for revolver cartridges. The taper crimp firmly holds the bullet while keeping the case mouth square for proper headspacing.
Why do my reloads chamber better after running them through this die?
The carbide sizing ring at the bottom of the die post-sizes the entire finished round as it crimps, squeezing any bulge or oversize brass back down to spec. This is why many reloaders grab it specifically to rescue rounds that won't drop into a chamber or gauge. It's the same carbide ring used in Lee's Bulge Buster kit.
Will this die work for calibers other than .45 ACP?
Yes. While it's marked .45 ACP, the same die also handles .45 Auto Rim, .45 Winchester Magnum, and .45 GAP. That makes it a handy pickup if you load more than one of the big-bore forty-fives.
Do I still need to trim my cases when using this crimp die?
Case trim length isn't critical with the Lee Factory Crimp Die, so you can skip the trimming and chamfering step that other crimping methods often require. The die sizes and crimps in a single press stroke, which saves a real amount of time on high-volume loading.



Reviews
There are no reviews yet.