Description
If you're loading .458 SOCOM for a hard-hitting AR, getting a solid, repeatable crimp matters just as much as your powder charge. The Lee Factory Crimp Die handles that job with a collet design that squeezes the case mouth into a crimp all the way around instead of rolling it over. The result is a firm hold on the bullet and loaded rounds that feed and chamber the way you'd expect from factory ammo.
How the Lee .458 SOCOM Factory Crimp Die Works
The collet in this die gently but firmly presses the end of the case into a segmented crimp. Because it works from the outside in rather than mashing the mouth down over the bullet, it's nearly impossible to buckle a case the way a traditional roll crimp die can. Case trim length isn't critical with this design either, which takes some of the fussiness out of prepping that big SOCOM brass. One nice bonus for the .458 crowd: even bullets with no cannelure or crimp groove will take a usable crimp, since the collet forms its own bite into the jacket.
Why a Firm Crimp Helps Your .458 SOCOM Loads
A tighter crimp means pressure has to build to a higher level before the bullet starts moving. That higher start pressure gives you a more uniform pressure curve and less velocity variation from shot to shot, which shows up downrange as better consistency. For a short, fat subsonic or thumping supersonic cartridge like the .458 SOCOM, that bullet retention also helps fight setback during feeding in a semi-auto.
Fitting the Lee Factory Crimp Die Into Your Setup
This is a single crimp die with standard 7/8 inch-14 threads, so it drops right into any common single-stage or progressive press. It ships in a Lee storage box to keep it organized on the bench. Run it as a separate final step after seating, or add it as the last station in your progressive to crimp as you go. It's a well-liked, no-nonsense addition for anyone building their own .458 SOCOM rounds.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90815
- UPC: 734307908157
- Caliber: .458 SOCOM
- Die Type: Factory Crimp Die
- Crimp Style: Collet / segmented straight crimp
- Number of Dies: 1
- Thread Size: 7/8 inch-14
- Material: Steel
- Shell Holder Included: No
- Storage Box Included: Yes
- Gun Type: Rifle
What’s Included
- Lee .458 SOCOM Factory Crimp Die (single die)
- Plastic storage box
- Instructions
Frequently Asked Questions
Do I need a crimp groove on my bullets to use the Lee .458 SOCOM Factory Crimp Die?
No. The collet in this die forms its own crimp into the jacket, so even bullets with no cannelure or crimp groove will take a firm, usable crimp. Lee's own testing shows those bullets often shoot more accurately once crimped this way.
Does case trim length matter with this Factory Crimp Die?
Trim length is not critical with this design, which is one of the big conveniences of the Lee Factory Crimp Die. The collet squeezes the end of the case rather than rolling it over, so small variations in case length won't throw off your crimp like they can with a standard roll crimp die.
Will the Lee .458 SOCOM Factory Crimp Die fit my press?
Yes. It uses standard 7/8 inch-14 threads, so it threads right into any common single-stage or progressive reloading press. You can run it as a separate final step or add it as the last station on a progressive to crimp as you load.
Is a shell holder included with this die?
No, a shell holder is not included with the Factory Crimp Die. You'll need the correct shell holder for .458 SOCOM separately if you don't already have one. The die does ship in a plastic storage box to keep it organized on the bench.





Reviews
There are no reviews yet.