Description
The Lee Carbide 3-Die Set for 32 H&R Magnum covers everything you need to turn once-fired brass into fresh handgun loads. It's built around a carbide full-length sizing die, a powder-through expanding die, and a bullet seating die, so you can size, charge, flare, seat, and crimp without hopping between brands or hunting down extra tooling. Lee machines these to tight tolerances, which is a big part of why their dies have a reputation for turning out accurate, repeatable ammo year after year.
What the Carbide Sizing Die Buys You
The headline here is the solid carbide ring in the sizing die. With carbide doing the work, you skip the case lube step entirely and save yourself the mess of wiping cases down afterward. Lee grinds their carbide insert to a contour that avoids the belt mark you sometimes see on straight-wall brass sized in ordinary carbide dies. For anyone loading 32 H&R in volume, that no-lube convenience adds up fast.
A Smart Pick for 32 H&R and 327 Federal Shooters
One of the best-kept secrets about this set is that it also works for 327 Federal Magnum, since the two cartridges share the same case body. That makes it a favorite for folks running a 327 revolver who don't want to pay a premium for hard-to-find 327-specific dies. Keep in mind the 327 load data isn't printed on the included sheet, so you'll want to reference a current reloading manual for those recipes.
In the Box with Your Lee 3-Die Set
The powder-through expanding die flares the case mouth while charging powder in one motion, which pairs nicely with an auto-disk measure or the included dipper. The bullet seating die handles seating and crimping together, with crimp adjustable from a slight taper to a full roll. You also get a universal shell holder, powder dipper, load data, and a plastic storage box to keep it all together on the bench.
Key Specifications
- Caliber: 32 H&R Magnum (also loads 327 Federal Magnum)
- Number of Dies: 3
- Die Type: Carbide Full-Length Sizing, Powder-Through Expanding, Bullet Seating
- Sizing Die Material: Steel with solid carbide insert
- Case Lube Required: No
- Thread Size: 7/8 inch-14
- Crimp: Adjustable, slight taper to full roll
- Shell Holder: Included (Universal)
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90809
- UPC: 734307908096
- Country of Manufacture: United States
What’s Included
- Carbide full-length sizing die with decapping unit
- Powder-through expanding die
- Bullet seating and crimping die
- Universal shell holder
- Powder dipper
- Instructions and load data sheet
- Plastic storage box
Frequently Asked Questions
Do I need case lube with the Lee Carbide 3-Die Set for 32 H&R Magnum?
No. The sizing die uses a solid carbide ring, so you can size your brass without any case lube. That saves a step and the cleanup that comes with lubing straight-wall pistol cases.
Can this 32 H&R Magnum die set reload 327 Federal Magnum?
Yes. Because the 32 H&R and 327 Federal share the same case body, the 90809 set handles both cartridges. The printed load data covers 32 H&R, so reference a current reloading manual for your 327 Federal recipes.
Does the Lee 3-die set include a separate crimp die?
The crimp is built into the bullet seating die, which seats and crimps in one operation. It adjusts from a slight taper all the way to a full roll crimp. Some reloaders like to add Lee's separate Factory Crimp Die for extra consistency, but it isn't required to load good ammo.
What shell holder comes with this set?
A universal shell holder is included in the box, so you're ready to run on a single-stage or turret press right away. The powder dipper and load data sheet are included as well.



Reviews
There are no reviews yet.