0
0

Lee Precision Taper Crimp Die .44 Special / .44 Magnum 90784

UPC: 734307907846

$10.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision Taper Crimp Die is a standalone crimp die built from hardened steel, made to give your handloads a clean, even taper crimp at the case mouth. It covers .44 S&W Special, .44 Remington Magnum, and the older .44 Russian, so one die handles a whole family of cartridges that share the same case diameter. This is the kind of tool that earns its spot on the bench when you want more consistency round to round, since a uniform crimp translates into steadier bullet pull and more predictable results downrange.

Where the Lee Taper Crimp Die Fits In

Think of this as a dedicated finishing step. Rather than crimping as part of the seating operation, you seat your bullet first and then run the case through this die on its own station or stroke. That separation gives you finer control over the crimp and takes some of the guesswork out of it. It was originally designed to overcome crimp problems tied to older die designs, and plenty of reloaders keep one on hand specifically to standardize mixed brass. One tip that comes up often is measuring loaded case diameter with a seated bullet, then dialing the crimp to match so everything chambers the same.

Fitment and Setup for the .44 Special Taper Crimp Die

Lee builds this die with industry-standard 7/8 inch by 14 threads, so it drops into just about any single stage, turret, or progressive press from Lee, RCBS, Hornady, Lyman, Redding, Dillon, and others. Setup is straightforward: thread the die down until it touches the shellholder for a light crimp, then run a test round and adjust from there until the case mouth looks right. Keep in mind that jacketed bullets need a crimp groove or cannelure for the crimp to seat into properly.

If you already run a newer Lee die set, know that the seater in those sets already applies a modified taper crimp, so this die shines most for folks loading with older equipment, mixing headstamps, or who simply prefer crimping as a separate, repeatable step.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90784
  • UPC: 734307907846
  • Caliber: .44 Special / .44 Remington Magnum / .44 Russian
  • Product Type: Taper Crimp Pistol Die
  • Die Series: Crimp
  • Material: Hardened Steel
  • Carbide: No
  • Thread: 7/8 inch x 14 (industry standard)
  • Dies In Set: 1
  • Length: 4.8 in
  • Dimensions: 1.55 x 1.70 x 4.80 in

What’s Included

  • Lee Precision Taper Crimp Die (.44 Special / .44 Magnum)
  • Storage box
  • Instruction sheet

Frequently Asked Questions

What calibers does the Lee Taper Crimp Die .44 Special work with?

This single die is set up for .44 S&W Special and .44 Remington Magnum, which share the same case diameter. It also works with the older .44 Russian cartridge. One die covers the whole family, so you don't need a separate crimp die for each.

Will this die fit my press?

Yes, it uses the industry-standard 7/8 inch by 14 thread, so it threads into virtually any single stage, turret, or progressive press, including Lee, RCBS, Hornady, Lyman, Redding, and Dillon. You just install it in an open station and set your crimp. No special adapters are needed for standard presses.

Do I still need this if I already own a newer Lee die set?

The seating die in Lee sets made in recent decades already applies a modified taper crimp, so this die adds the most value for reloaders running older equipment or those who prefer to crimp as a dedicated, separate step. Plenty of people also buy it to standardize crimp across mixed-headstamp brass. It is really about giving you more control over that one operation.

Can I use jacketed bullets with this taper crimp die?

You can, but jacketed bullets need a crimp groove or cannelure for the crimp to seat into properly. Without that groove, a taper crimp on a smooth jacket won't hold as intended. Lead and plated bullets with a crimp groove work the same way.

Additional information

UPC

734307907846

Manufacturer

Manufacturer Part Number

90784

Caliber/Gauge

.44 Magnum

Length

4.8000

Product Type

Taper Crimp Pistol Die

Shipping Weight

0.4313

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Taper Crimp Die .44 Special / .44 Magnum 90784”