Description
If you've ever fought with inconsistent crimps on your .40 S&W or 10mm Auto reloads, the Lee Taper Crimp Die gives you a dedicated station just for that final step. It's a single hardened-steel die built to overcome crimp problems that come from older or poorly designed die geometry, so your case mouths come out clean and square instead of buckled or over-crimped. A taper crimp is the right call for these rimless semi-auto cartridges since they headspace on the case mouth, and that's exactly what this die is made to deliver.
Why a Separate Taper Crimp Die Earns Its Spot
Plenty of seating dies will seat and crimp in one motion, but getting both dialed in perfectly on a single station is a real juggling act. By running your crimp as its own operation, you can seat the bullet at one station and set your crimp at another, which makes fine-tuning far simpler. Reloaders using this die on everything from single-stage presses to progressive setups like a Dillon have found it adjusts easily and holds its setting once the o-ring lock nut is snugged down.
Getting the Most From the Lee Taper Crimp Die
This die is designed to work with Lee die sets made before 1986, and it offers little or no advantage paired with 1986 or newer Lee dies, since those already use a modified taper crimp angle. If you're running older Lee tooling, mixing calibers, or just want dedicated control over your crimp, it's a smart add. It's also handy for taming case bulge on fired .40 and 10mm brass, and it works nicely for crimping hollow points headed into tight-chambered pistols. One thing worth noting: if you're loading jacketed bullets, they need a crimp groove to work properly with this style of die.
Lee has been building reloading gear for decades, and this little die carries that same no-nonsense value. It ships in a plastic storage container to keep it clean and organized on the bench between sessions.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90782
- UPC: 734307907822
- Caliber: .40 S&W / 10mm Auto
- Die Type: Taper Crimp Pistol Die
- Material: Hardened Steel
- Carbide: No
- Dies In Set: 1
- Length: 4.8 in
- Width: 1.65 in
- Height: 1.60 in
- Shipping Weight: 0.45 lb
What’s Included
- Lee Taper Crimp Die (.40 S&W / 10mm Auto)
- O-ring lock nut
- Plastic storage container
Frequently Asked Questions
What does the Lee Taper Crimp Die actually do?
It applies a taper crimp to the case mouth of your .40 S&W or 10mm Auto reloads as a dedicated step. A taper crimp is the right choice for these rimless cartridges because they headspace on the case mouth, so you get a secure hold without rolling the mouth over. Running it as its own station makes it much easier to fine-tune the crimp compared to doing it at the seating station.
Do I need this die if I already have a Lee die set?
It depends on the age of your dies. This taper crimp die is designed to help with Lee die sets made before 1986, and it offers little or no advantage with 1986 or newer Lee dies since those already use a modified taper crimp angle. If you're running older Lee tooling or want dedicated crimp control, it's worth adding.
Can I use jacketed bullets with this die?
Yes, but jacketed bullets need to have a crimp groove, also called a cannelure, to work properly with this die. The crimp groove gives the case mouth something to grip for a firm, consistent hold. Plated and lead bullets with the appropriate profile work fine as well.
Will this die work on a progressive press?
It will. Reloaders run this die on single-stage, turret, and progressive presses, including setups like a Dillon 650 for 10mm loads. The o-ring lock nut lets you tighten it down while still allowing small adjustments, and it holds its setting once you've got it where you want it.




Reviews
There are no reviews yet.