Description
Crimping is one of those steps that quietly makes or breaks a batch of reloads, and the Lee Taper Crimp Die exists to take the guesswork out of it. This is a dedicated, single hardened-steel die built for .38 Special and .357 Magnum brass, and it applies a smooth taper crimp to the case mouth instead of rolling it hard into the bullet. The result is a straight or slightly tapered case mouth that holds the bullet firmly without buckling the case the way an aggressive roll crimp can.
What the Lee Taper Crimp Die Brings to the Bench
Lee designed this die to clean up crimp problems that come from older or poorly cut dies, so if you've got a set that's leaving you with inconsistent case mouths, dropping this in as a separate crimp station is an easy fix. It crimps the bullet firmly in place and makes it nearly impossible to buckle the case the way a standard roll crimp die sometimes will. One thing worth knowing up front: if you're running jacketed bullets, they'll need a crimp groove, or cannelure, for the taper crimp to bite into properly.
Setting Up Your Taper Crimp Die
The die body uses the industry-standard 7/8-14 thread, so it screws into any standard single-stage, turret, or progressive press without adapters. It ships with a Lee lock ring that uses an O-ring for a friction fit, meaning you can finger-tighten it, hold your adjustment, and return to the same setting after pulling the die. Dialing in a taper crimp is straightforward: thread it down until it just kisses the case mouth, run a round, check your crimp, and fine-tune from there.
Where This Lee Die Fits In
This one is popular with folks loading revolver rounds for competition and high-volume range work, where fast, trouble-free crimping keeps the line moving. Keep in mind it offers little to no advantage if you're already running 1986-or-newer Lee dies, since those carry a modified taper crimp in the seating die already. For anyone with older gear or a mixed bench, though, it's a cheap, durable way to get uniform results every pull of the handle.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90781
- UPC: 734307907815
- Caliber: .38 Special / .357 Magnum
- Product Type: Taper Crimp Pistol Die
- Die Series: Crimp
- Dies in Set: 1
- Material: Hardened Steel
- Thread: 7/8-14
- Length: 4.7 in
- Country of Origin: United States
What’s Included
- Lee Taper Crimp Die (.38 Special / .357 Magnum)
- Lee lock ring
- Instructions
Frequently Asked Questions
What's the difference between this taper crimp die and a roll crimp?
A roll crimp bends the case mouth inward into the bullet's crimp groove, while this Lee Taper Crimp Die squeezes the case mouth straight down for a gentler, more uniform hold. The taper crimp makes it nearly impossible to buckle the case, which is a common headache with roll crimps. It's a good choice when you want consistent bullet retention without over-working the brass.
Can I use the Lee Taper Crimp Die with jacketed bullets?
Yes, but jacketed bullets need a crimp groove, also called a cannelure, for the taper crimp to seat into properly. Without that groove, the die won't have anything to grip and your crimp won't be reliable. Cast and lead bullets with a crimp groove work fine as well.
Will this die fit my press?
The die body uses the standard 7/8-14 thread, so it threads into any industry-standard single-stage, turret, or progressive press without adapters. It comes with a Lee lock ring that holds your adjustment so you can pull the die and reinstall it at the same setting. That makes it easy to add as a dedicated crimp station.
Do I need this if I already have a newer Lee die set?
If you're running Lee dies made in 1986 or later, the seating die already includes a modified taper crimp, so this separate die offers little to no added benefit. It really shines for folks with older dies or mixed brands that are leaving inconsistent case mouths. For a dedicated crimp station on a progressive setup, plenty of reloaders still like having it as its own step.




Reviews
There are no reviews yet.