Description
The Lee Precision Pacesetter 2-Die Set for .264 Winchester Magnum covers the two operations every reloader needs for this classic magnum: resizing fired brass back to spec and seating bullets to the length you want. It ships with a full-length sizing die, a bullet seating and crimping die, a universal shell holder, a powder dipper, and the instructions with load data, so you're set up to start loading without hunting down extra parts. Because .264 Win Mag is a lower-demand chambering, Lee builds these as a limited production run, which is why they come as a two-die set rather than the three-die layout you see on more common calibers.
What the Pacesetter .264 Win Mag Dies Actually Do
The full-length sizing die returns fired brass to factory dimensions so it chambers reliably in any .264 Win Mag rifle, which is the way to go for hunting ammo and anything running through a magazine. It decaps as it sizes and uses a collet-type decapper clamp that keeps the expander centered and lets the decapping pin slide up if it hits an obstruction, which saves you from snapping pins. Keep in mind this is a full-length sizer, so case lube is required before you run brass through it.
Seating and Crimping with the .264 Win Mag Pacesetter Set
The seating die does double duty. It positions the bullet to your chosen overall length and can apply either a roll or taper crimp depending on how you adjust it in the press. Back it off a bit and it seats with no crimp at all, which is what most folks loading jacketed hunting bullets for a bolt gun prefer. Worth noting that a standalone Factory Crimp Die is not part of this set, so if you want that separate crimping step you'd add that die on its own.
Why Reloaders Keep Reaching for Lee Pacesetter Dies
Lee has been turning out reloading dies for decades, and the Pacesetter line is a big reason the brand is a go-to for people who want solid, repeatable ammo without a big outlay. The dies are machine honed to a smooth interior finish, the sizing die shank is stout enough to drive out a stuck case, and the whole set gives you factory-quality loads for a rifle that doesn't always have a lot of off-the-shelf ammo options. For a .264 Win Mag owner who likes feeding the rifle rounds built to their own recipe, this is a straightforward, dependable starting point.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90774
- UPC: 734307907747
- Caliber: .264 Winchester Magnum
- Product Type: Pacesetter LP Rifle 2-Die Set with Shell Holder
- Set Configuration: 2-Die Set (Full Length Sizing + Bullet Seating/Crimping)
- Material: Steel
- Thread Size: 7/8-14
- Case Lube Required: Yes (full length sizing)
- Factory Crimp Die Included: No
- Production Type: Limited Production
What’s Included
- Full Length Sizing Die
- Bullet Seating and Crimping Die
- Universal Shell Holder
- Powder Dipper
- Instructions and Load Data
Frequently Asked Questions
Does the Lee Pacesetter .264 Win Mag set include a Factory Crimp Die?
No, this is a two-die set that includes the full-length sizing die and the bullet seating and crimping die. The seating die itself can put a roll or taper crimp on your brass depending on how you set it up. If you want the separate collet-style Factory Crimp Die, you'd need to buy that one on its own.
Do I need case lube with these dies?
Yes. The full-length sizing die requires case lubrication before you run brass through it, same as any full-length rifle sizer. Lube every case lightly to avoid getting one stuck, and wipe the brass down afterward.
Will these dies work in my press?
The Pacesetter dies use the standard 7/8-14 thread, so they thread into any common single stage or turret press and most progressives. The set also comes with the correct universal shell holder for .264 Winchester Magnum, so you're ready to go on the bench.
Why is this a 2-die set instead of a 3-die set?
The .264 Win Mag is a lower-volume chambering, so Lee makes it as a limited production Pacesetter set with just the sizer and seater. More common calibers often get the three-die layout that adds the Factory Crimp Die. For most .264 loads, the full-length sizer and seating die cover what you need.




Reviews
There are no reviews yet.