Description
Finding factory 7.35 Carcano on the shelf is a tall order, so if you've got one of these old Italian rifles sitting in the safe, loading your own is pretty much the way to keep it fed. Lee's Pacesetter 2-Die Set is built specifically for the 7.35×51 cartridge and gives you the two core dies needed to turn empty brass into shootable ammo. This is a limited production set, meaning Lee makes it in smaller runs to cover oddball and vintage calibers that the big names tend to skip.
What the Pacesetter 2-Die Set Does
Inside the box you get a full-length sizing die and a bullet seating die. The sizing die resizes the whole case back to spec and knocks out the spent primer in one stroke, which matters a lot when you're running range brass or cases that were fired in a different rifle. The seating die sets your bullet to the depth you want. Being a 2-die set, it does not include a separate Lee Factory Crimp Die, but the seating die can apply a crimp if you dial it in that way. Both dies are steel, machine honed to a smooth finish, and use Lee's finger-tighten lock rings that hold their setting when you pull the die from the press.
Loading the 7.35 Carcano
The 7.35×51 is a quirky one. It was adopted by Italy in 1938 as a necked-up version of the 6.5×52 Carcano case, and it uses a nonstandard .298 to .300 bullet diameter rather than the .308 you'd find in most .30 calibers. That's exactly why a purpose-cut die set like this is worth having. These rifles can shoot surprisingly well with good handloads, so slug your barrel, pick the right diameter bullet, and work your loads up carefully.
In the Box With This Carcano Die Set
Along with the two dies you'll find a universal shell holder, a powder dipper, and Lee's printed instructions with load data to get you started. Lee backs their dies with a guarantee of accuracy, so you're in good shape for feeding that collectible rifle for years to come.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90766
- UPC: 734307907662
- Caliber: 7.35x51mm Carcano
- Die Series: Pacesetter (Limited Production)
- Dies In Set: 2
- Sizing Type: Full Length
- Gun Type: Rifle
- Metal Type: Steel
- Shell Holder: Included (Universal)
- Shipping Weight: 0.9 lb
What’s Included
- Full-length sizing die
- Bullet seating die
- Universal shell holder
- Powder dipper
- Instructions and load data
Frequently Asked Questions
What comes in the Lee Pacesetter 2-Die Set for 7.35 Carcano?
The set includes a full-length sizing die, a bullet seating die, a universal shell holder, a powder dipper, and printed instructions with load data. That covers the core steps of resizing your brass and seating bullets. It's a complete starting point for anyone with a 7.35×51 Carcano who wants to roll their own.
Does this die set include a Factory Crimp Die?
No. As a 2-die set, it does not include Lee's separate Factory Crimp Die, which is what you'd find in a 3-die set. The bullet seating die can still apply a crimp if you adjust it to do so. If you want a dedicated crimp step, you'd add the Factory Crimp Die separately.
Why do I need a special die set for the 7.35 Carcano?
The 7.35×51 Carcano uses a nonstandard bullet diameter around .298 to .300 inch, which is slimmer than the .308 bullets common to most .30 caliber rounds. Factory ammo is also hard to find for this old Italian cartridge, so handloading is often the most reliable way to keep one shooting. A caliber-specific set like this is dimensioned for the Carcano case so everything works together.
Will the full-length sizing die work with mixed range brass?
Yes. Full-length sizing resizes the entire case back to spec, which is the way to go when you're working with brass that was fired in different rifles or picked up at the range. It also decaps the spent primer in the same stroke. Just remember to use case lube on the sizing step to avoid stuck cases.




Reviews
There are no reviews yet.