0
0

Lee Factory Crimp Die 5.7×28 FN – Collet Style Reloading Die 90725

UPC: 734307907259

$18.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 5.7×28 is one of those cartridges that can give reloaders fits when it comes time to crimp, and that's exactly where this Lee Factory Crimp Die earns its keep. It uses a collet that squeezes the case mouth evenly around the bullet to lock it in place, which takes a fussy little bottleneck round and makes it a lot more pleasant to load. The result is a firm, uniform crimp on every round coming off your press.

What sets the collet design apart is that your bullets don't need a dedicated crimp groove. The collet is strong enough to form the crimp itself, so you're not limited to bullets with a cannelure. That flexibility is a real plus with the 5.7×28, where component options can be all over the map.

Why the 5.7×28 FN Crimp Die Matters

A good crimp does more than just hold the bullet. Because pressure has to build to a higher level before the bullet starts moving, you get a more uniform pressure curve and less velocity variation from shot to shot. For a small, high-velocity cartridge like the 5.7×28, that kind of consistency shows up on paper and helps your loads behave the same way round after round.

Setting Up the Lee Factory Crimp Die

This is a single die that threads into any standard reloading press, and it's the final step after sizing, priming, charging, and seating. It runs as a separate crimping operation, which lets you dial in your seating depth independently and keep the crimp consistent without guesswork. Trim length isn't as critical with this style of die, so it's a forgiving setup once you have it adjusted.

Keep in mind this is the crimp die only, not a full die set, so it's meant to round out a press you've already got running for the 5.7×28. If you reload this caliber and want tighter bullet hold and steadier numbers, it's a smart, no-nonsense addition to the bench.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90725
  • UPC: 734307907259
  • Caliber: 5.7×28 Fabrique Nationale
  • Die Type: Factory Crimp (Collet Style)
  • Die Series: Factory Crimp
  • Carbide: No
  • Dies in Set: 1
  • Shell Holder Included: No
  • Cartridge Style: Bottleneck
  • Length: 4.75 in
  • Shipping Weight: 0.38 lb

What’s Included

  • Lee Factory Crimp Die for 5.7×28 FN (single collet-style crimp die)

Frequently Asked Questions

Is the Lee Factory Crimp Die for 5.7×28 FN a complete die set?

No, this is the crimp die only, not a full reloading set. It's a single collet-style die meant to be added to a press you're already set up to load 5.7×28 on. You'll still need your sizing and seating dies to complete the process.

Do my bullets need a crimp groove to use this die?

No, they don't. The collet in this die is strong enough to form its own crimp, so it works with bullets that have no cannelure or crimp groove. That gives you a lot more flexibility when choosing components for the 5.7×28.

Why run a separate crimp die instead of crimping while seating?

Crimping as its own step lets you set seating depth and crimp independently, which usually gives you a cleaner, more repeatable result. The firmer, more uniform crimp also helps build consistent start pressure, leading to less velocity variation. For a small high-velocity round like the 5.7×28, that consistency is worth the extra step.

Does this die fit standard reloading presses?

Yes, it threads into any standard 7/8-14 reloading press, which covers the vast majority of single-stage and turret presses out there. Just install it as your final crimping station after seating. A shell holder is not included, so make sure you have the correct one for the 5.7×28.

Additional information

UPC

734307907259

Manufacturer

Manufacturer Part Number

90725

Caliber/Gauge

5.7×28 Fabrique Nationale

Length

4.7500

Product Type

Factory Crimp Pistol Die

Shipping Weight

0.38

Reviews

There are no reviews yet.

Be the first to review “Lee Factory Crimp Die 5.7×28 FN – Collet Style Reloading Die 90725”