Description
If you're running a .300 Blackout and reloading your own brass, case trimming is one of those jobs that eats up bench time fast. The Lee Precision Quick Trim Die for .300 AAC Blackout takes the fuss out of it. This is a caliber-specific die body that holds your brass square and secure while the cutter does the work, so every case ends up the same length without pulling out the calipers or fiddling with adjustments.
How the .300 Blackout Quick Trim Die Fits Your Setup
This die is designed to work with Lee's Deluxe Quick Trim Case Trimmer or the Value Quick Trim Case Trimmer, both of which are sold separately. The die threads in at standard 7/8-14, so it drops right into any reloading press that accepts common dies. Setup is about as simple as it gets: raise the ram, thread the die down to the shell holder, snug it up, and you're trimming. The cutter is not included with this die body, since one universal cutter runs across all the Quick Trim calibers you own.
What the Quick Trim Die Does to Your Brass
The real draw here is that it handles three steps in one pass. As you turn the cutter, it trims the case to the correct length while chamfering and deburring both the inside and outside of the case mouth at the same time. No measuring, no separate chamfer tool, no second station. Folks who run a lot of .300 Blackout, including those forming brass from .223/5.56 cases, tend to appreciate how much tedium this knocks out of the prep cycle.
A couple of real-world tips worth knowing: keep the die and cutter blades clean, since brass shavings can collect inside the body and throw off consistency if they build up. Running it on a dedicated press for prep work keeps the mess contained. Many reloaders also pair it with the power version and a low-speed drill, which rips through a pile of cases in a hurry while still leaving a clean mouth. For a tool this affordable that saves this much time, it earns its spot on the bench quickly.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90689
- UPC: 734307906894
- Caliber: .300 AAC Blackout / Whisper (7.62x35mm)
- Product Type: Quick Trim Die
- Die Series: Quick Trim
- Die Type: Trimmer
- Thread Size: Standard 7/8-14
- Pieces in Set: 1
- Shell Holder Included: No
- Cutter Included: No (sold separately)
- Country of Origin: United States
- Length: 4.9 in
- Shipping Weight: 0.3125 lb
What’s Included
- One Lee Precision Quick Trim Die body for .300 AAC Blackout (MPN 90689)
Frequently Asked Questions
Do I need anything else to use the .300 Blackout Quick Trim Die?
Yes. This is the caliber-specific die body only, and it requires a Lee Quick Trim case trimmer to do the cutting. It works with the Lee Deluxe Quick Trim Case Trimmer or the Value Quick Trim Case Trimmer, both sold separately. The cutter is universal, so once you own one you only need to add die bodies for each caliber you load.
Does the Lee Quick Trim Die chamfer and deburr, or just trim?
When used with the compatible Lee trimmer, it trims the case to length while chamfering and deburring both the inside and outside of the case mouth in the same motion. That means you handle three prep steps in one pass instead of trimming and then chamfering separately. No calipers or measuring are needed once it's set up.
Will this die fit my reloading press?
It uses a standard 7/8-14 thread, so it fits any reloading press that accepts common dies. Setup is quick: raise the ram, thread the die down to the shell holder, snug it, and start trimming. A dedicated single-stage or turret press for prep work keeps things tidy since the cutter produces brass shavings.
Can I use this to trim brass I'm forming from .223 into .300 Blackout?
Yes, this die works well for trimming cases converted from .223/5.56 to .300 Blackout, which is a common reason people buy it. It brings every case to a uniform length and cleans up the mouth at the same time. Just keep the die body and cutter blades clear of shavings to maintain consistent results.




Reviews
There are no reviews yet.