Description
Loading your own .41 Remington Magnum is one of the smartest moves a revolver owner can make, and this Lee Precision set gives you the core tools to do it right. The kit covers the three jobs that turn a fired case back into a loaded round: a carbide full-length sizing die, a powder-thru expanding die, and a bullet seating die. Because the sizing die is carbide and contour-ground, you skip the whole case lubing routine that steel dies demand. That alone saves a messy, tedious step and keeps your brass clean.
What the 90628 Brings to Your Loading Bench
The sizing die carries an unbreakable decapper that knocks out spent primers without bending or snapping on you. The bullet seating die uses a free-floating design that keeps bullets straight as they settle into the case, which helps with consistency round to round. Lee also built in finger-adjustable locking rings, so you can dial in your die settings by hand rather than wrestling with wrenches. If a case ever gets stuck, the integrated stuck-case remover takes the headache out of clearing it.
Dialing In the .41 Rem Mag 3-Die Set
The seating die includes a built-in crimp, and the .41 Mag uses a roll crimp, which is exactly what this cartridge wants for dependable ignition of slower-burning magnum powders. A firm, uniform crimp matters more on heavy magnum loads than it does on mild target rounds, so take a little time setting it. Reloaders who run Lee dies across several calibers tend to find this set holds up and performs right alongside pricier brands.
The .41 Remington Magnum has always had a loyal following among handgun hunters and big-bore revolver fans, and factory ammo for it is not always easy to come by. Rolling your own keeps you shooting and lets you tune loads to your gun. This set ships with a universal shell holder and powder dipper, so you have the basics to get going once you add brass, primers, powder, and bullets.
Key Specifications
- Manufacturer: Lee Precision
- Model: Carbide 3-Die Set
- Manufacturer Part Number: 90628
- UPC: 734307906283
- Caliber: .41 Remington Magnum
- Number of Dies: 3
- Die Material: Carbide
- Sizing: Full length, no case lube required
- Crimp Type: Roll crimp (built into seating die)
- Gun Type: Handgun / Revolver
- Shell Holder: Universal shell holder included
- Length: 4.9 in
What’s Included
- Carbide full-length sizing die
- Powder-thru expanding die
- Bullet seating die
- Universal shell holder
- Powder dipper
- Instructions and load data
- Storage case
Frequently Asked Questions
Do I need case lube with the Lee Carbide 3-Die Set for .41 Rem Mag?
No. The sizing die is carbide and contour-ground, so it resizes brass without any lubricant. That saves you the messy lubing and cleaning step that steel dies require.
What does the .41 Rem Mag seating die do for crimping?
The bullet seating die has a built-in crimp, and for .41 Magnum that is a roll crimp. A firm roll crimp is important on magnum revolver loads because it helps slower-burning powders ignite consistently. You can adjust the amount of crimp to suit your load.
Is a shell holder included with the 90628 set?
Yes. A universal shell holder and a powder dipper come in the box, along with instructions and load data. You will still need to supply your own brass, primers, powder, and bullets to start loading.
Will this Lee set work on my single-stage or turret press?
Yes. These are standard 7/8-14 threaded dies that fit single-stage, turret, and progressive presses from Lee and most other major brands. The powder-thru expanding die is also set up to work with a powder measure if you run one.





Reviews
There are no reviews yet.