Description
Loading your own 7.62×39 is one of the better ways to stretch a case of surplus brass and dial in a round that your SKS, AK, Mini-30, or bolt gun actually likes. The Lee Pacesetter 3-Die Set 7.62x39mm gives you the three core dies to do it: a full length sizing die, an easy adjust dead length bullet seating die, and the Lee Factory Crimp Die. The bodies are machined from hardened steel and progressively honed to a smooth finish, which is what keeps the sizing stroke clean and your finished rounds coming out to factory dimensions that feed reliably.
These are standard 7/8-14 thread dies, so they thread straight into any common single stage or progressive press from Lee, RCBS, Hornady, Lyman, Dillon and the rest. Full length sizing is the way to go here, especially if you're running mixed range brass or loading cases that were fired in a different rifle, since it brings everything back to spec.
What Sets the Pacesetter 7.62×39 Set Apart
The 7.62×39 is notorious for not having a standardized bullet diameter. Most Combloc barrels run .311 to .312, while a lot of American-made barrels are cut closer to .308 to .310. This set ships with expanders for both .308 and .311 bullets, with the .308 installed from the factory. That means you can tune neck tension to whatever your bore actually measures without hunting down parts later. The smart move before you load is to slug your barrel so you know which bullet and expander to run.
Why the Factory Crimp Die Matters
The Lee Factory Crimp Die is the piece that really earns its keep in this set. It squares up your crimp independent of seating depth and gives you adjustable crimp from a slight taper all the way to a firm roll, which helps with consistency and keeps bullets from walking under recoil in semi-autos. For a cartridge that lives in rough-and-tumble rifles, that extra bit of hold is worth having. Pair it with the dipper and included load data and you've got a genuine starting point for your first batch.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90565
- UPC: 734307905651
- Caliber: 7.62x39mm
- Die Series: Pacesetter
- Die Type: 3-Die Set (Full Length)
- Number of Dies: 3
- Material: Hardened Steel
- Carbide: No
- Thread: 7/8-14 (standard)
- Shell Holder: Included
- Expanders Included: .308 (installed) and .311
- Country of Manufacture: USA
- Shipping Weight: 1.03 lb
What’s Included
- Full Length Sizing Die
- Easy Adjust Dead Length Bullet Seating Die
- Lee Factory Crimp Die
- Universal Shell Holder
- .308 and .311 expanders (.308 installed)
- Powder dipper
- Instructions and load data
- Plastic storage box
Frequently Asked Questions
Does the Lee Pacesetter 7.62×39 set come with a shell holder?
Yes, the correct shell holder is included right in the box, so you don't have to buy one separately. You also get a powder dipper and a load data sheet, which makes this a complete starting point for loading 7.62×39.
Can this set load both .308 and .311 diameter bullets?
It can. The set includes expanders for both .308 and .311 bullets, with the .308 expander installed from the factory. Since 7.62×39 bore diameters vary quite a bit between American and Combloc barrels, it's worth slugging your barrel first so you can pick the right bullet and matching expander for proper neck tension.
Will these dies fit my press?
Yes. These are standard 7/8-14 thread dies, so they thread into just about any common single stage or progressive press, including Lee, RCBS, Hornady, Lyman, and Dillon setups.
What does the Lee Factory Crimp Die do?
It applies a consistent crimp that's independent of your seating depth, with adjustment ranging from a light taper to a firm roll. That extra bullet hold helps keep rounds consistent and prevents bullets from backing out under recoil, which is especially handy in semi-autos like the SKS and AK.




Reviews
There are no reviews yet.