Description
The Lee Pacesetter 3-Die Set in .44-40 Winchester is a complete, ready-to-work package for anyone loading this classic cowboy and lever-gun cartridge. Lee builds these dies from hardened steel and includes the odds and ends most companies make you buy separately, so you can set up your press and start making brass the same day it shows up. For a round like the .44-40, with its thin case walls and tapered profile, having a matched die set takes a lot of the guesswork out of getting consistent, reliable ammo.
What the Lee Pacesetter .44-40 Set Does
Three dies handle the full job. The full-length sizing die resizes the whole case back to spec and knocks out the spent primer. The powder-through expanding die opens and flares the case mouth with a hollow plug, which lets you drop powder through it at the same time if you're running an Auto-Disk measure or using the included dipper. The Easy Adjust Dead Length bullet seating die then sets your bullet to a repeatable depth. Because the .44-40 uses a steel sizing die rather than carbide, you'll want case lube on your brass before sizing, and Lee resizing lubricant works perfectly for that.
Why Reloaders Reach for the Lee Pacesetter Dies
The appeal here is value and completeness. Longtime RCBS and other brand users who pick one up tend to be pleasantly surprised at how much is in the box and how clean the finished rounds turn out. The included load data sheet and powder dipper make this a genuinely good entry point if .44-40 is new territory for you, and the dies use the standard 7/8 by 14 thread, so they drop into Lee, Hornady, RCBS, Lyman, Dillon, and other common presses without any adapters.
Keep in mind the seating die handles both seating and crimp together, so take your time dialing it in and pay attention to bullet diameter for the cleanest results. Once it's set, it cranks out dependable .44-40 rounds that chamber smooth in both revolvers and lever guns.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90564
- UPC: 734307905644
- Caliber: .44-40 Winchester
- Die Series: Pacesetter
- Number of Dies: 3
- Die Material: Hardened Steel
- Sizing Type: Full-Length
- Thread: 7/8-14
- Case Lube Required: Yes (steel sizing die)
- Shell Holder: Included
- Length: 4.85 in
- Shipping Weight: 1.225 lb
What’s Included
- Full-Length Sizing Die
- Powder-Through Expanding Die
- Easy Adjust Dead Length Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions and Load Data
Frequently Asked Questions
Do I need case lube with the Lee Pacesetter .44-40 die set?
Yes. This set uses a steel full-length sizing die rather than a carbide one, so you'll need to lubricate your brass before sizing. Lee resizing lubricant works well for this, and lubing also helps keep the thin .44-40 case walls from getting damaged during sizing.
Will these dies fit my press?
They should. Lee Pacesetter dies use the standard 7/8 by 14 thread, which fits common single-stage and progressive presses from Lee, RCBS, Hornady, Lyman, Dillon, and others. No adapters needed for a standard press.
Does the Lee Pacesetter .44-40 set include a crimp die?
This set includes the Easy Adjust Dead Length bullet seating die, which handles seating and crimp together in the same operation. Because seating and crimping happen at the same time, it's worth taking your time to dial it in and watching your bullet diameter for the most consistent results.
Is this set good for someone new to reloading .44-40?
It's a solid starting point. The set comes complete with the shell holder, powder dipper, and a load data sheet, so you have most of what you need to begin beyond a press and components. Reloaders coming from other brands often comment on how complete the package feels right out of the box.




Reviews
There are no reviews yet.