Description
The Lee Carbide Sizer Die for 9mm Luger is the single die that does the heavy lifting in any pistol reloading setup. It takes fired brass that's been bulged and expanded by firing and squeezes it back down to spec while punching out the old primer in the same stroke. The star of the show is the tungsten carbide sizing ring, which is hard enough that it has to be ground and polished with diamond wheels. That hardness is exactly why you can skip the case lube step entirely, which saves you a messy, time-consuming part of the process and lets you get right to loading.
What Sets the Lee 9mm Carbide Sizing Die Apart
Most carbide sizers leave a telltale ring or belt mark on the case. Lee grinds the carbide insert to a special contour that sizes closer to the rim than other brands and skips that objectionable belt mark. On top of that, the carbide ring actually burnishes the brass as it passes through, so your cases come out with a cleaner finish than they went in. Carbide won't wear out either, so this is a buy-once die that'll outlast a whole lot of brass.
Decapping and Setup on the Lee Carbide Sizer Die
The die uses a collet-held decapping pin that's tough to break, even if you knock out a crimped military primer or get your adjustment slightly off. It threads into any standard single-stage or progressive press with the common 7/8-14 die thread, so it drops right into most setups. Keep in mind this is a sizing die sold on its own, so you'll want a decapping/sizing die as part of a larger lineup that includes an expander and a seating/crimp die to load complete rounds.
Reloaders who run a lot of 9mm tend to keep spare sizing dies around, and Lee is a popular pick because you get well-built, dependable carbide at a price that leaves money for components. If you're replacing a worn or jammed die from another brand or starting your pistol reloading from scratch, this one slots right in and gets to work.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90548
- UPC: 734307905484
- Caliber: 9mm Luger
- Die Type: Full Length Carbide Sizing Die
- Sizing Ring Material: Tungsten Carbide
- Number of Dies: 1
- Thread Size: 7/8-14
- Case Lube Required: No
- Decapper: Collet-held decapping pin
- Shell Holder Included: No
- Storage Box Included: Yes
What’s Included
- Lee Carbide Full Length Sizing Die for 9mm Luger (1)
- Collet-held decapping pin assembly
- Storage box
Frequently Asked Questions
Do I need case lube with the Lee Carbide Sizer Die for 9mm?
No, the tungsten carbide sizing ring is diamond polished and slick enough to size brass without any lubricant. That lets you skip the lube step entirely and move straight into resizing. It's one of the biggest time savers carbide dies offer over plain steel dies.
Does the Lee 9mm Carbide Sizer Die decap the brass too?
Yes, this full-length sizing die resizes the case and knocks out the spent primer in the same stroke using a collet-held decapping pin. That decapper is built tough and holds up well even on crimped military primers. You won't need a separate depriming step.
Will this die fit my press?
It uses the standard 7/8-14 die thread, so it threads into virtually any single-stage or progressive press on the market. If you're running a Lee, RCBS, Dillon, Hornady, or similar press, it drops right in.
Does the Lee Carbide Sizer Die come with a shell holder?
No, the shell holder is sold separately. You'll want to pair it with a shell holder sized for 9mm Luger, and if you're loading complete rounds you'll also need an expander/powder-through die and a seating die to finish the job.




Reviews
There are no reviews yet.