Description
The .303 British is one of those classic cartridges that reloaders love to keep feeding, and surplus-priced factory ammo isn't what it used to be. This Lee Precision Pacesetter 3-Die Set (model 90547) gives you the full toolkit to turn once-fired brass into reliable range and hunting ammo. The set threads into any standard single-stage or turret press thanks to the universal 7/8-14 die bodies, so it drops right into whatever you're already running, whether that's a Lee, RCBS, Hornady, or Dillon setup.
What the Lee 90547 Pacesetter Set Does
You get three dies plus accessories. The full-length sizing die resizes the whole case back to spec and deprimes in the same stroke, which is the way to go if you're shooting multiple rifles or loading mixed-headstamp brass. The sizer uses Lee's collet-style decapper clamp that holds the expander centered and lets the decapping pin slide up harmlessly if it hits a blockage, so you're not snapping pins on crimped or crudded-up primer pockets. The shank is built tough enough to drive out a stuck case without wrecking the die.
The Factory Crimp Die Advantage
The piece that sets this Pacesetter kit apart is the Lee Factory Crimp Die. It applies a firm, adjustable crimp that runs anywhere from a slight taper to a full roll, which helps hold your bullets in place under recoil and tends to tighten up consistency shot to shot. Pair it with the Easy Adjust Dead Length bullet seating die and you've got repeatable seating depth without a lot of fiddling.
Included Extras in the Pacesetter Kit
Lee throws in the correct shell holder for the .303 British, a powder dipper, and instructions with starting load data, so a newer reloader can get going without hunting down separate parts. It all tucks into Lee's molded storage box to keep everything together on the bench. Made in the USA and backed by Lee's warranty, this is the standard-setter in their die lineup for good reason.
Key Specifications
- Manufacturer: Lee Precision
- Model: Pacesetter 3-Die Set
- Manufacturer Part Number: 90547
- UPC: 734307905477
- Caliber: .303 British
- Number of Dies: 3
- Dies Included: Full Length Sizing, Dead Length Bullet Seating, Factory Crimp
- Die Thread: 7/8-14
- Material: Steel
- Shell Holder: Included
- Application: Rifle
- Country of Manufacture: USA
- Shipping Weight: 1.25 lbs
What’s Included
- Full Length Sizing Die
- Easy Adjust Dead Length Bullet Seating Die
- Factory Crimp Die
- Universal Shell Holder
- Powder Dipper
- Instructions with Load Data
- Molded Storage Box
Frequently Asked Questions
Does the Lee 90547 Pacesetter set come with a shell holder?
Yes, this set includes the correct shell holder for the .303 British, so you don't have to buy one separately. It also comes with a powder dipper and load data to help you get started right out of the box.
Will these Lee dies fit my press?
The dies use the standard 7/8-14 thread, which fits virtually every modern single-stage and turret press, including Lee, RCBS, Hornady, Lyman, and Dillon. If your press takes common die bodies, this set will thread right in.
What does the Factory Crimp Die in this set actually do?
The Lee Factory Crimp Die applies an adjustable crimp that ranges from a light taper to a full roll crimp. That extra bullet hold helps keep rounds consistent under recoil and in tubular or heavy-recoiling rifles, and it often improves accuracy and reliability.
Is this a good die set for a beginner loading .303 British?
It's a popular choice for first-time reloaders because the kit includes nearly everything needed to start sizing and loading, along with instructions and starting load data. The full-length sizer also handles mixed brass from different rifles, which is handy when you're working with range pickups or surplus cases.





Reviews
There are no reviews yet.