Description
This is Lee Precision's carbide full length sizing die for .45 ACP, sold as a single die (part number 90532) for folks who want to build their own setup or replace a sizer in an existing bench. It handles the first step of handgun reloading, resizing your fired brass back to spec and knocking out the spent primer in one pull of the handle.
The heart of this die is a solid tungsten carbide sizing ring. Carbide is tough enough that it has to be ground and polished with diamond wheels, and that slick finish is what lets you run your brass dry. No case lube, no sticky residue to wipe off afterward, and no measurable wear even after serious volume. Lee points out these same dies get used in commercial loading machines running thousands of cycles an hour, so personal reloading won't come close to tiring one out. The carbide insert is also ground to a special contour that sizes closer to the rim than most competing dies and won't leave a belt mark on your cases.
What the 90532 Sizing Die Brings to the Bench
The decapping setup is one of the smarter touches here. The collet held decapper is nearly unbreakable, and if you misadjust it or run into a crimped military primer, it harmlessly slides up instead of snapping. You can reset it as many times as you need. That makes this a solid pick if you process range brass or mixed once-fired cases that haven't been sorted perfectly.
Fitment for Your .45 ACP Setup
The die uses standard 7/8"-14 threads, so it drops into any common single stage or progressive press. Beyond .45 ACP, this same die also handles .45 Auto Rim, .45 GAP, and .45 Win Mag, which makes it handy if you load across the .45 family. Keep in mind this is the sizing die only, so no shellholder is included with it. If you already have your shellholder sorted, this fills the sizing slot and gets you cranking out clean, consistent brass.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90532
- UPC: 734307905323
- Caliber: .45 ACP
- Also Fits: .45 Auto Rim, .45 GAP, .45 Win Mag
- Die Type: Carbide Full Length Sizing Die
- Sizer Material: Tungsten Carbide Insert
- Body Material: Steel
- Thread Size: 7/8"-14
- Case Lube Required: No
- Decapper: Collet held, resettable
- Number of Dies: 1
- Country of Origin: United States
What’s Included
- Lee .45 ACP Carbide Full Length Sizing Die
- Plastic storage case
Frequently Asked Questions
Do I need case lube with the Lee carbide sizing die?
No. The carbide sizing ring is diamond polished and slick enough to run your brass dry. That saves you the lube step and the cleanup afterward, which speeds up your whole prep routine.
Does the 90532 die come with a shellholder?
No, this is the sizing die only, so it does not include a shellholder. You'll want to have the correct shellholder on hand or pick one up separately. It does come packaged in its own plastic storage case.
Will this die fit my press?
It uses standard 7/8"-14 threads, so it threads into pretty much any common single stage or progressive reloading press. That makes it an easy drop-in if you need to add or replace a sizer in your current setup.
Besides .45 ACP, what else does this die work with?
The same die also sizes .45 Auto Rim, .45 GAP, and .45 Win Mag. If you load more than one cartridge in the .45 family, that cross-compatibility makes it a versatile piece to have on the bench.




Reviews
There are no reviews yet.