Description
This Lee Precision 90457 mold is built for reloaders who go through a lot of pistol bullets and want to keep feeding their press without buying projectiles one box at a time. The 6-cavity block drops six .356 diameter, 125 grain round nose bullets with every pour, which adds up quickly over a casting session. That 2 ogive radius round nose profile works across 9mm Luger, 38 Super Auto, and 380 Auto, so one mold covers a good chunk of the common semi-auto lineup.
Lee builds these blocks from aluminum for a reason. The material heats up and cools down faster than cast iron or steel, which means you get up to casting temperature sooner and deal with less operator fatigue on long runs. Aluminum also won't rust the way iron blocks can, so storage between sessions is less of a worry. The cavities are CNC machined for roundness and size consistency, and the blocks ride on steel bushings and alignment pins to keep the halves lined up pour after pour.
What the Lee 90457 Mold Casts
The trochoidal venting on the mold face and sprue plate lets the cavities fill out cleanly and consistently, which is a big part of getting good bullets early in a session. Most bullets from Lee molds can be loaded as cast or with a quick sizing pass, and many casters powder coat or lube and plate these before shooting. The hard anodized sprue plate holds up to repeated cuts.
Setting Up Your Lee Precision Mold
Keep in mind the handles and bullet lube are sold separately. This block is designed to pair with Lee Commercial Mold Handles (part 90005), which fit the 6-cavity blocks. A little hinge and sprue plate prep with anti-seize goes a long way toward smooth operation once you get rolling. This is a workhorse for anyone wanting to turn scrap lead and wheel weights into a steady supply of practice ammo.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90457
- UPC: 734307904579
- Cavities: 6
- Bullet Diameter: .356 inch
- Bullet Weight: 125 Grain
- Bullet Style: Round Nose (2 Ogive Radius)
- Compatible Cartridges: 9mm Luger, 38 Super Auto, 380 Auto
- Block Material: Machined Aluminum
- Sprue Plate: Hard Anodized
- Compatible Handles: Lee Commercial Mold Handles (90005)
What’s Included
- Lee Precision 6-cavity .356 125gr bullet mold block
- Hard anodized sprue plate
Frequently Asked Questions
What cartridges does the Lee Precision 90457 mold work with?
This mold casts a .356 diameter, 125 grain round nose bullet that works for 9mm Luger, 38 Super Auto, and 380 Auto. The 2 ogive radius round nose profile feeds well in most semi-auto pistols chambered for those rounds.
Do handles come with this Lee bullet mold?
No, handles and bullet lube are sold separately. This block is designed to use Lee Commercial Mold Handles, part number 90005, which fit the 6-cavity blocks. You will want a set before you start casting.
Why does Lee use aluminum blocks instead of iron or steel?
Aluminum heats up and cools down faster than cast iron or steel, so you get to casting temperature quicker and deal with less fatigue on long runs. It also resists rust, which makes storage between sessions easier. The tradeoff is that aluminum calls for a little care to avoid dinging the blocks.
Do the bullets from this mold need to be sized before loading?
Most bullets cast from Lee molds can be loaded as cast or with a quick sizing pass depending on your firearm and alloy. Many casters run these through a .356 sizing die and then powder coat or lube them before loading. Check your cast diameter against your barrel to decide what works best for your setup.




Reviews
There are no reviews yet.