Description
If you shoot a .44 caliber cap and ball revolver or any black powder gun that likes a .454 round ball, this Lee Precision 90442 mold lets you make your own projectiles for pennies instead of chasing boxes of pre-cast balls. Each pour drops two round balls at a time at a nominal .454 diameter, weighing right around 140 grains when cast from pure soft lead. The blocks are machined from aluminum, which heats up fast, sheds lead easily, and won't rust on you like steel can.
What the Lee 90442 .454 Mold Does Well
Lee bores these cavities on a lathe for tight roundness control, and the company backs them to within .001 or tighter. In the real world that means balls that drop close to size and shoot straight without you needing to size them afterward. The .454 is a popular choice for Pietta and Uberti .44 revolvers because it shaves a clean, full ring of lead when you seat it in the chamber, which helps the ball seal and group well. It also works nicely for revolver and black powder loads where a 141 grain soft lead ball is called for.
Getting the Most From This Double Cavity Ball Mold
Stick with pure, soft lead rather than wheel weights or hardened alloy. Soft lead loads easier, seals the bore better, and keeps you from straining your loading lever. A few pointers that pay off: smoke the cavities and the underside of the sprue plate with a candle before your first run, keep a corner of the blocks in the melt to bring them up to temperature, and expect the first several balls to come out wrinkled until the mold warms up. Once you find your rhythm, this is a fast caster that can turn out a few hundred balls an hour.
The tangential sprue cut-off is a nice touch too, trimming the sprue cleanly so you don't fight an ugly nib on each ball. Treat the mold right, keep the alignment pins and sprue pivot lubed, and it will hold up for years and thousands of balls.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90442
- UPC: 734307904425
- Ball Diameter: .454
- Ball Weight: 140.47 Grain
- Cavities: Double Cavity (2)
- Block Material: Aluminum
- Projectile Type: Round Ball
- Intended Use: Black Powder / Muzzleloader
- Roundness Guarantee: Within .001 or less
- Overall Length: 10.75 in
- Country of Origin: Made in USA
What’s Included
- Aluminum double cavity .454 round ball mold block
- Mold handles
- Sprue plate
Frequently Asked Questions
What firearms is the Lee 90442 .454 round ball mold good for?
It's a popular pick for .44 caliber cap and ball revolvers like Pietta and Uberti models, where the .454 ball shaves a clean ring of lead when seated and seals the chamber well. It also suits black powder loads calling for a roughly 140 grain soft lead round ball. Many shooters prefer the .454 over a .451 in a .44 for tighter groups.
What kind of lead should I use with this mold?
Use pure, soft lead rather than wheel weights or hardened alloy. Soft lead loads easier in a cap and ball revolver, seals the bore better on firing, and won't put extra strain on your loading lever. Hard alloy also changes the finished ball diameter, so stick with pure lead for consistent .454 results.
Do I need to size the balls after casting with the Lee 90442?
No. Lee bores the cavities for tight roundness and most balls drop ready to load straight from the mold, no sizing required. Just keep your melt at casting temperature and develop a steady rhythm for the most consistent results.
How many round balls does the double cavity mold cast at once?
It casts two .454 balls per pour thanks to the double cavity design. Once the mold is up to temperature and you settle into a rhythm, you can turn out a few hundred balls an hour. Expect the first handful to come out wrinkled until the blocks fully warm up.




Reviews
There are no reviews yet.