Description
The Lee Precision 90362 is a double cavity bullet mold that casts a .309 diameter, 113-grain flat nose bullet, catalogued by Lee as the C309-113-F. It's a favorite among folks loading subsonic .300 Blackout, but the .309 projectile fits a wide range of .30 caliber work. Compatible cartridges run from 30-30 Winchester and 30-06 to 30-40 Krag, 30 Remington, and plenty more, so one block covers a lot of ground on the bench.
Why Casters Reach for the Lee 90362
Lee machines these mold blocks from aluminum, which keeps them rust resistant and about a third the weight of iron or steel molds. That lighter mass means less arm fatigue during long casting sessions, and aluminum heats up and cools down quicker, so you'll usually get frosty, well-filled bullets after only a handful of pours. Reloaders who've run this mold consistently mention how fast it comes up to temperature and how cleanly the bullets drop from the cavities.
How the C309-113-F Bullet Measures Up
The finished bullet runs .623 inches overall, with the first lube groove sitting .175 inches back from the nose. It's a flat base, flat nose design with a stubby profile some casters nickname the "soup can," and it has a reputation for shooting well once you get your alloy and sizing dialed in. To get the cavities round and consistent, Lee clamps the block halves together and lathe-bores them for tight roundness and size control, and the tangential cutoff keeps a clean base free of the nib left at the sprue.
Keep in mind the mold handles and sprue plate are included, but sizing and lubing gear is sold separately. If you plan to size and lube your cast bullets, you'll want to pair this with a Lee push-through sizing kit or a lube-sizer in .309. Weights listed are Lee's figures using their suggested alloy, so your real-world weight will shift a bit depending on the lead mix you run.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90362
- Model: C309-113-F
- UPC: 734307903626
- Bullet Diameter: .309 inch
- Bullet Weight: 113 grain
- Bullet Profile: Flat Nose, Flat Base
- Caliber: .30 Caliber
- Cavities: 2 (Double Cavity)
- Block Material: Aluminum
- Bullet Overall Length: .623 inch
- Nose to First Lube Groove: .175 inch
- Ballistic Coefficient: .154 (G1)
- Overall Length: 10.75 inch
- Country of Manufacture: United States
What’s Included
- Lee 90362 double cavity mold block (C309-113-F)
- Mold handles
- Sprue plate
Frequently Asked Questions
What cartridges will the Lee 90362 mold work for?
This mold casts a .309 diameter 113-grain bullet that suits a wide range of .30 caliber cartridges. That includes 30-30 Winchester, 30-06, 30-40 Krag, 30 Remington and its variants, plus 30-284 and others. It's especially popular with folks loading subsonic and light .300 Blackout.
Does the Lee 90362 mold come with handles?
Yes. The mold ships with the handles and the sprue plate included, so you can start casting right out of the box. Keep in mind that sizing and lubing equipment is not included and is sold separately if you want to finish your bullets to a final diameter.
Why aluminum instead of steel or iron blocks?
Lee machines these blocks from aluminum, which makes them rust resistant and roughly a third the weight of iron or steel molds. Aluminum also heats up and cools down faster, so you'll typically get good, fully filled bullets after only a few casts. The lighter weight also cuts down on hand fatigue during longer casting sessions.
What does the finished bullet measure?
The C309-113-F casts a flat nose, flat base bullet with a .623 inch overall length, and the first lube groove sits .175 inches back from the nose. Lee's listed 113-grain weight is based on their suggested alloy, so your actual weight will vary slightly depending on the lead mix you use.



Reviews
There are no reviews yet.