Description
The .357 SIG is a bottleneck cartridge, which is why Lee builds this set with steel dies rather than carbide. A bottleneck case doesn't play nice with a carbide ring the way a straight-wall pistol case does, so the plan here is simple: lube your brass before sizing and the dies do clean, consistent work. Lee resizing lubricant or a case lube spray gets the job done and keeps your cases from dragging inside the sizer.
This is a three-die setup that covers the full handloading process from start to finish. You get a full-length sizing die to bring fired brass back to spec, a powder-through expanding die that lets you charge the case and flare the mouth in one motion, and a bullet seating die to set your projectile and apply a crimp. The seating die has two crimp shoulders built in, and since the .357 SIG headspaces on the case mouth, you'll want to stick with a light taper crimp rather than rolling it.
What the Lee .357 SIG Die Set Brings to the Bench
Lee dies use the standard 7/8-14 thread, so they'll thread right into just about any modern single-stage, turret, or progressive press, including Dillon, Hornady, Lyman, RCBS, and of course Lee. The set ships in a fitted storage caddy that's handy for keeping the dies organized and ready, and more than a few reloaders use that same box to store a turret already set up for the caliber.
A Solid, No-Fuss Choice for .357 SIG Reloaders
For anyone working up loads for a SIG P226, P229, a Glock 31 or 32, or any other .357 SIG pistol, this set gives you the three core dies plus the extras to get rolling. Reloaders consistently point to Lee gear as strong value that holds up over the long haul, and these dies are no exception as long as you keep your brass lubed. One thing worth noting is that a separate factory crimp die isn't part of this kit, so if you prefer that extra step you'll want to grab one alongside it.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90270
- UPC: 734307902704
- Caliber: .357 SIG
- Product Type: Steel 3-Die Set Pistol
- Dies in Set: 3
- Metal Type: Steel
- Thread Size: 7/8-14
- Shell Holder: Included
- Case Lubrication: Required
- Country of Origin: United States
What’s Included
- Full-length sizing die
- Powder-through expanding die
- Bullet seating die
- Universal shell holder
- Powder dipper
- Instructions and load data
- Fitted storage box
Frequently Asked Questions
Why is the Lee .357 SIG die set steel instead of carbide?
The .357 SIG is a bottleneck cartridge, and companies build these the way they do rifle dies rather than straight-wall pistol dies. A carbide ring sizes straight-wall brass well but isn't practical for a bottleneck case, so Lee uses steel here. The tradeoff is simple: you lube your brass before sizing and the dies work great.
Do I need to lube my cases with this die set?
Yes. Because the sizing die is steel, you'll want to apply case lubricant before running your brass through it. Lee resizing lubricant or a case lube spray both work well, and keeping cases lubed also prevents brass buildup inside the die over time.
Will these dies fit my press?
They should. Lee dies use the standard 7/8-14 thread, which fits modern presses from Dillon, Hornady, Lyman, RCBS, and Lee. That covers most single-stage, turret, and progressive setups out there.
Does this set include a factory crimp die?
No, the factory crimp die is a separate item and isn't part of this three-die set. The included bullet seating die does apply a crimp, and since the .357 SIG headspaces on the case mouth you'll want a light taper crimp. If you prefer a dedicated crimp step, you can add a factory crimp die separately.



Reviews
There are no reviews yet.