Description
If you run a Lee powder measure and load rifle, this little die is the piece that bridges the two. The Lee Long Charging Die threads into your press and gives your Auto-Disk, Pro Auto-Disk, or Auto-Drum powder measure a home right over the case. Powder drops straight through into the case as the shell rides up, which keeps your bench quicker and your charges more consistent than spooning powder by hand. It covers cases from 1.760 to 2.620 inches in overall length, which is a wide net spanning everything from .223 Remington on up to .300 Winchester Magnum.
How the Lee Long Charging Die Earns Its Keep
This works a lot like Lee's pistol powder-through expanding die, with one key difference: it does not flare or expand the case mouth. On rifle brass, that expansion job is handled by your sizing die, so the charging die stays focused on one thing and does it well. The body uses the standard 7/8-14 thread, so it sits in any common single stage, turret, or progressive press without fuss. If you've got boat tail bullets you can usually seat right after charging, but with flat base bullets you'll want to chamfer the inside of the case mouth first for a smooth start.
Picking Between the Long and Short Charging Die
Lee builds this in two flavors, and getting the right one matters. The Long version here handles cases 1.760 to 2.620 inches, covering the bulk of common bottleneck rifle rounds. If your brass falls in the 0.860 to 1.760 inch range, that's territory for the short charging die instead. Measure your sized cases before you order so the powder drop lines up where it should.
For anyone running a turret or progressive setup, this is one of those small upgrades that smooths out the whole process. It takes a hand-metering step off your plate and lets the powder measure feed each case as you cycle the press, which is exactly the kind of time saver that adds up over a long loading session.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90194
- UPC: 734307901943
- Product Type: Rifle Charging Die
- Die Type: Long Cases
- Case Length Range: 1.760 to 2.620 inches
- Cartridge Coverage: .223 Remington to .300 Winchester Magnum
- Caliber: Multi-Caliber
- Thread Size: 7/8-14
- Material: Steel
- Compatible Measures: Auto-Disk, Pro Auto-Disk, Auto-Drum
- Carbide: No
- Country of Origin: United States
What’s Included
- Lee Long Charging Die
- Plastic storage box
Frequently Asked Questions
What powder measures work with the Lee Long Charging Die?
It's built to pair with the Lee Auto-Disk, Pro Auto-Disk, and Auto-Drum powder measures. The measure threads right into the top of the die so powder drops straight through into the case as it rides up. If you already run one of those measures, this die is the link that puts it to work on your rifle brass.
Does the Lee Long Charging Die expand the case mouth?
No, it does not flare or expand the case mouth. On rifle cartridges, that expansion is handled by your sizing die, so the charging die's only job is dropping the powder charge. With flat base bullets you'll want to chamfer the inside of the case mouth so seating goes smoothly.
Which cartridges does this Long Charging Die cover?
It works with cases measuring 1.760 to 2.620 inches in overall length, which spans a wide range of rifle rounds from .223 Remington up to .300 Winchester Magnum. That covers most popular bottleneck rifle cartridges in that size window. Just measure your sized brass to confirm it falls in that range.
What's the difference between the Long and Short charging die?
The Long version here fits cases from 1.760 to 2.620 inches, while the short charging die covers shorter brass in the 0.860 to 1.760 inch range. Picking the right one comes down to your case length so the powder drop lines up correctly. Measure your cases first and match the die to that number.





Reviews
There are no reviews yet.