Description
The .357 Sig is a notoriously fussy cartridge to crimp. That short bottleneck shape and the setback problems that come with a hard-recoiling auto round can make consistent crimps a headache with ordinary seating dies. Lee built this Factory Crimp Die specifically to solve that, and it uses a collet instead of a roll or taper crimp to do the job. The collet squeezes the case mouth down onto the bullet evenly from all sides, giving you a firm hold that stands up to the recoil and feeding cycle of a pistol like the P229 or Glock 32.
What Sets the .357 Sig Factory Crimp Die Apart
Unlike the straight-wall carbide pistol crimp dies, this is a collet-style design made for bottleneck handgun cases. The collet is powerful enough that your bullets don't need a cannelure or crimp groove to begin with. It'll form one and hold the bullet tight regardless. That even, all-around squeeze is one of the reasons handloaders reach for it when bullet setback is a concern, since the .357 Sig tends to push bullets back into the case under recoil if the hold isn't solid.
Setting Up Your Lee Crimp Die
This die uses the standard 7/8-14 thread, so it drops right into any common single-stage or progressive press. One nice thing about separating your crimp into its own step is that case trim length isn't critical, which saves you an extra prep operation. It also lets you keep dead-length seating and crimping as two distinct steps, so you're not fighting one adjustment against the other. The die body is hardened steel and comes in a plastic storage box to keep it protected on the bench.
Reloaders who run .357 Sig consistently point to this die as the fix for keeping bullets where they belong. It's a simple tool that does one job and does it well, and it's a smart addition whether you're building range ammo or working up a carry load you want to count on round after round.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90076
- UPC: 734307900762
- Caliber: .357 Sig
- Product Type: Crimp Die
- Crimp Style: Collet-style Factory Crimp (bottleneck)
- Die Material: Hardened Steel
- Thread Size: 7/8-14
- Dies In Set: 1
- Gun Type: Handgun
- Country of Origin: United States
- Shipping Weight: 0.45 lbs
What’s Included
- Lee .357 Sig Collet-Style Factory Crimp Die
- Plastic storage box
- Instructions
Frequently Asked Questions
Does the .357 Sig Factory Crimp Die use a carbide sizing ring?
No. This is the collet-style version built for the .357 Sig bottleneck case, not the carbide pistol crimp die used on straight-wall cartridges like 9mm or 45 ACP. Instead of a carbide ring, it uses a collet that squeezes the case mouth evenly around the bullet. That design is better suited to the shape of a bottleneck handgun round.
Will this die work on bullets without a crimp groove or cannelure?
Yes. The collet is strong enough to form its own crimp even on bullets that don't have a cannelure. It squeezes the case mouth firmly onto the bullet regardless of whether a groove is present, which is one of the reasons handloaders like it for .357 Sig.
Does the Lee Factory Crimp Die help with bullet setback in .357 Sig?
That's exactly what it's known for. The .357 Sig is prone to pushing bullets back into the case under recoil and feeding, and the even collet crimp gives you a firmer, more consistent hold than a typical seating die crimp. Reloaders routinely use it to keep bullets locked in place for reliable feeding and chambering.
Do I need a shell holder and does this fit a standard press?
The die uses the common 7/8-14 thread, so it fits standard single-stage and progressive presses. A shell holder is sold separately and is not included with the die. You'll want the correct shell holder for the .357 Sig case to run it.




Reviews
There are no reviews yet.