Description
The 16 gauge market can be tough to keep stocked, which is exactly why owning a Lee Load-All II and this conversion kit makes so much sense. Instead of buying a whole second press, you drop in a new die carrier and keep rolling your own 16 gauge hulls. The entire carrier is replaced as a unit, so none of the dies need adjusting after the swap. You pull the old carrier, set this one in place, and you are ready to run.
What the Load-All II 16 Gauge Kit Brings to the Bench
This is a factory kit from Lee Precision built specifically to feed 16 gauge through the Load-All II. The steel sizer resizes the brass base of each fired hull back to spec, the wad guide helps seat wads cleanly, and the matched shell holder keeps everything aligned through the cycle. It is a smart move for anyone who shoots an old 16 in the uplands and is tired of paying a premium for factory shells, or just wants to load shells that are hard to find on the shelf.
Fit Notes Before You Order the 90071 Kit
One thing worth knowing up front: this kit is made for the Load-All II, not the earlier generation Load-All with the red metal base. If your press is the current style, you are good to go. The carrier design means there is no trial-and-error setup, which keeps your downtime short when you want to switch gauges on the same press.
Why 16 Gauge Reloaders Reach for This Conversion Kit
Shooters who run this kit tend to appreciate how simple the gauge change really is, and it holds up well over plenty of loading sessions. Pair it with good 16 gauge load data and components, work carefully, and you can build consistent shells at a fraction of what a box of factory ammo runs. It is one of the more practical ways to keep an orphan gauge alive and shooting.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90071
- UPC: 734307900717
- Product Type: Shotshell Conversion Kit
- Gauge: 16 Gauge
- Compatibility: Lee Load-All II press
- Sizer Material: Steel
- Finish: Black
- Capacity: 1 Shotgun Shell
- Country of Origin: United States
- Quantity: 1
What’s Included
- Die carrier assembly
- Steel sizer
- Wad guide
- Shell holder
- Load data
- Instructions
Frequently Asked Questions
Will this conversion kit work on any Lee Load-All press?
It is designed for the Lee Load-All II press. It will not fit the older first-generation Load-All with the red metal base. If you have the current Load-All II, this kit drops right in.
Do I need to adjust the dies after installing the 16 gauge kit?
No. The entire die carrier is replaced as a single unit, so the dies come already set. You pull the old carrier, install this one, and you are ready to load.
What comes in the Load-All II 16 gauge conversion kit?
The kit includes the die carrier, a steel sizer, the wad guide, a shell holder, load data, and instructions. That is everything needed to change your press over to 16 gauge. You will still supply your own hulls, powder, shot, primers, and wads.
Is a 16 gauge kit worth it over just buying factory shells?
For 16 gauge, it usually is. Factory 16 gauge ammo tends to be pricier and harder to find than 12 or 20, so reloading lets you keep that gauge fed. With good components and the right load data, you can build consistent shells and save over the long run.



Reviews
There are no reviews yet.