Description
This is Lee Precision's take on the classic Minie bullet, built for folks who shoot .50 caliber muzzleloaders and want to pour their own projectiles instead of buying them. The mould drops a .500 diameter, 354 grain hollow-base Minie with a target-style nose and Lee's micro band grooves, which usually means little or no sizing before you load. It's a single cavity design with an automatic core pin that forms the hollow base every drop, so you get that signature skirt that expands under charge and grips the rifling for a good seal.
What Sets the Modern Minie Mould Apart
Lee reached for aluminum on the block halves, and there's a real reason behind it. Aluminum heats up and cools down quicker than iron or steel, so you can be dropping good bullets after just a handful of casts instead of waiting around for the mould to come up to temperature. The blocks are machined for tight roundness and size control, and because they run about a third of the weight of steel blocks, your hands won't be wiped out partway through a long casting session. The trade-off is that aluminum is softer, so treat it with a little care and it'll outlast most of your rifles.
Casting With the .50 Cal Minie Mould
The Modern Minie is considered the most accurate Minie in the Lee family, and casters have had good luck running it with pure lead for clean, consistent drops. Pure soft lead is the way to go here since Minie bullets rely on the powder charge expanding that hollow skirt to seal the bore, and a softer alloy expands more readily. Give the mould a proper break-in on day one, smoke the cavity, and bring your pace up as you go to keep temperature steady. Once it's dialed in, a steady rhythm will turn out plenty of bullets in an afternoon.
If you're shooting a .50 caliber inline or sidelock and want heavier knockdown than a patched round ball gives you, this Minie delivers more mass downrange and a noticeably firmer thump on target.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90471
- UPC: 734307904715
- Model: 500-354-M
- Caliber: .50 Caliber
- Bullet Diameter: .500 inch
- Bullet Weight: 354 Grains
- Bullet Type: Hollow Base Modern Minie, Target Design
- Cavity Count: Single Cavity
- Core Pin: Automatic
- Block Material: CNC Machined Aluminum
- Recommended Lead: Pure Soft Lead
- Country of Origin: United States
What’s Included
- Single cavity aluminum mould blocks
- Hardwood handles
- Hard anodized sprue plate
- Instructions
Frequently Asked Questions
What size bullet does the Lee Modern Minie Mould cast?
This mould drops a .500 diameter Minie bullet at a nominal 354 grains using the recommended alloy. It's a hollow base, target-style design meant for .50 caliber muzzleloaders. Keep in mind the finished weight can vary a little depending on the exact lead mixture you cast with.
What kind of lead should I use with this Minie mould?
Pure soft lead is the recommended choice for Minie bullets. The hollow base skirt needs to expand under the powder charge to seal the bore, and soft lead expands more readily than harder alloys. Running hard alloy often requires heavier charges just to get the skirt to obturate, so most folks stick with pure lead for the best accuracy.
Does the Lee Modern Minie Mould come with handles?
Yes. This single cavity mould ships with hardwood handles, a hard anodized sprue plate, the two aluminum block halves, and instructions, so you have what you need to start casting. You will still want a melting pot and your lead supply separately.
How many Minie bullets can I cast per hour with this mould?
Because the aluminum blocks heat and cool quickly, a steady caster can turn out roughly 200 bullets an hour with this single cavity mould once it's up to temperature. Give it a proper break-in and keep your casting pace consistent for the cleanest, most uniform drops.





Reviews
There are no reviews yet.