Description
Getting consistent seating depth is where good 7mm-08 handloads start to turn into great ones, and this Lee micrometer bullet seater is built to take the guesswork out of it. The laser-engraved thimble and body read just like a precision depth micrometer, with every division marking off one thousandth of an inch. There are no clicks to fight against, so you can split a thousandth and land exactly on the number you want, round after round.
This is a dead length seating die, meaning the body contacts the shell holder to lock in uniform seating depth every time you run the press. The seating stem is machined and burnished to make contact with nearly any bullet nose profile without leaving a mark, so your spitzers, hollow points, and bonded hunting bullets all come out clean.
What Sets the 7mm-08 Micrometer Seater Apart
The standout here is the floating bullet guide. It holds the case mouth and bullet in perfect alignment as the stem comes down, and because the guide has a little radial clearance, everything self-centers against the seater screw. The result is measurably less bullet runout, which is exactly what you're chasing when you're loading 7mm-08 for a bolt gun and want tight, repeatable groups.
Seat and Crimp in One Pass
The floating bullet guide is reversible. Unthread it, flip it, and reinstall, and now you can seat and crimp in a single operation, a feature exclusive to Lee. For plinking loads or hunting ammo where you want a touch of crimp, that saves you a station and a step. If you'd rather keep seating and crimping separate for match work, just leave the guide in its standard orientation.
The die ships with Lee's Ultimate Lock Ring so it stays put in your press once you've got it set. This seater formerly sold under product number 91423, so if you've been running the older version, this is the updated model with the upgraded floating guide. It works in any standard 7/8-14 threaded single stage or turret press.
Key Specifications
- Cartridge: 7mm-08 Remington
- Die Type: Micrometer Precision Bullet Seating Die
- Seating Style: Dead Length
- Adjustment: Laser-engraved micrometer, .001" divisions, no clicks
- Bullet Guide: Floating, reversible for seat and crimp in one operation
- Thread Size: 7/8-14
- Gun Type: Rifle
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92241
- Formerly Sold As: 91423
- UPC: 734307922412
- Shipping Weight: 0.61 lb
What’s Included
- Lee Micrometer Precision Bullet Seater Die (7mm-08 Rem)
- Reversible floating bullet guide
- Ultimate Lock Ring
- Instructions
Frequently Asked Questions
Does the 7mm-08 micrometer seater seat and crimp at the same time?
Yes. The floating bullet guide is reversible, so you simply unthread it, flip it, and reinstall to seat and crimp in a single operation, which is a feature exclusive to Lee. If you prefer to keep those steps separate for precision work, just leave the guide in its standard position.
What does the micrometer adjustment do that a standard Lee seater doesn't?
The laser-engraved micrometer thimble reads in one-thousandth-of-an-inch divisions, just like a precision depth micrometer, so you can set and return to an exact seating depth with repeatable accuracy. The adjustment is smooth with no clicks, which lets you split thousandths and fine-tune for your rifle's chamber.
Will this die mark or damage my bullet tips?
No. The seating stem is machined and burnished to contact nearly any point-style bullet without leaving a mark, so spitzers, hollow points, and hunting bullets all come out clean. The floating guide keeps the case mouth and bullet aligned through the stroke.
Does this seater fit standard reloading presses?
Yes. It uses the common 7/8-14 die thread, so it works in standard single stage and turret presses. It also comes with Lee's Ultimate Lock Ring to keep the die locked in place once you dial in your setting.





Reviews
There are no reviews yet.