Description
If you already run a Lee Load-All II and want to start cranking out 20 gauge shells without buying a whole second press, this is the piece you've been looking for. The Load-All II is one of the most budget-friendly shotshell presses around, and part of what makes it so handy is how quickly it jumps between gauges. This conversion kit handles the 20 gauge swap and comes with everything needed to make the change.
The real draw here is simplicity. The entire die carrier gets replaced as one unit, so you're not stuck re-adjusting dies or fighting with settings to get your shells sized right. Pop the old carrier off, drop the new one on, and you're loading a different gauge. For folks who load more than one gauge on the same bench, that kind of fast changeover saves a lot of headache.
What Comes in the Lee 20 Gauge Conversion Kit
Inside the box you get the die carrier, a steel sizer, the wad guide, and a shell holder sized for 20 gauge hulls. Lee also includes printed load data and instructions, which is a nice touch if you're new to a particular recipe or just want a reference right at the bench. It's a complete package built to get your press running in the new gauge, not a partial set you'll have to supplement.
A Note Before You Order This Load-All II Kit
One thing worth knowing: this kit is made for the Load-All II, the version with the plastic base. It will not fit the older, previous-generation Load-All that used the red metal base. If you're running the current Load-All II, you're good to go. This is geared toward reloaders who already understand the manual shotshell process, since it assumes you know your way around the press and your components.
For anyone loading 20 gauge target loads, upland hunting rounds, or just wanting to stretch their shell budget, this conversion kit is a smart, affordable way to add another gauge to your setup without doubling your equipment.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90072
- Model: Load-All II Conversion Kit
- UPC: 734307900724
- Gauge: 20 Gauge
- Compatibility: Lee Load-All II press (plastic base)
- Material: Metal and plastic components
- Type: Shotshell Conversion Kit
- Length: 7.85 in
- Warranty: Two year warranty
What’s Included
- Die carrier assembly
- Steel sizer
- Wad guide
- Shell holder
- Load data
- Complete instructions
Frequently Asked Questions
Will this conversion kit work on any Lee Load-All press?
This kit is made specifically for the Load-All II, which is the version with the plastic base. It will not fit the previous-generation Load-All that used the red metal base. If you have the current Load-All II, it's a direct fit.
Do I need to readjust anything after installing the 20 gauge kit?
No. The entire die carrier is replaced as a single unit, so there's no die adjusting or fine-tuning required. You simply swap the carrier and start loading 20 gauge shells.
Does the Load-All II 20 Gauge Conversion Kit come with load data?
Yes. Lee includes printed load data along with complete instructions, so you have a reference right at your bench. This is handy whether you're trying a new recipe or just want a quick sanity check on your components.
What exactly is in the box?
The kit includes the die carrier, a steel sizer, the wad guide, and a 20 gauge shell holder. Load data and instructions are included as well. It's everything you need to convert the press over to 20 gauge.




Reviews
There are no reviews yet.