Description
Lee's 459-405-HB mould drops a .459 diameter, 405 grain round nose hollow base bullet, the classic heavyweight for the .45-70 Government and other large bore cartridges in that family. Hollow base bullets have a long reputation in the cast crowd because the skirt obturates and grips the rifling, so the bullet does a good job fitting itself to your bore. If you shoot a lever gun or single shot in .45-70 and want to feed it without buying boxes of factory lead, this is a proven way to make your own.
What Sets the Lee 459-405-HB Mould Apart
The blocks are machined from aluminum, which is why they heat up and cool down quicker than iron or steel moulds and won't rust on you between casting sessions. Aluminum is also roughly a third the weight of steel blocks, so your hands and forearms stay fresh through a long run of bullets. The cavity is CNC machined for roundness and consistent sizing, and Lee builds all their hollow base moulds as single cavity only, using a self-centering automatic core pin to keep that hollow base aligned shot to shot.
Getting the Most From Your Single Cavity Hollow Base Mould
Like most aluminum moulds, this one rewards a proper preheat. Most folks find the first dozen or so pours come out frosty or wrinkled, then the mould settles in and starts dropping clean, crisp bullets with a flat base around the hollow portion. Keep the hinge and sprue plate lubed, run your lead hot, and you'll see sharp fill-out. The 405 grain weight listed is based on Lee's suggested alloy, so your actual bullet weight and diameter will shift a little depending on what you're melting, which is normal for cast work.
Matching Load to Alloy
One of the nice things about the hollow base design is that it shines with alloy matched to your load pressure, the way low to mid pressure .45-70 target loads are built. Pick an alloy that suits your velocity range, pan lube or tumble lube the bullets, and this mould will keep a pile of big bore lead flowing for years.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90268
- UPC: 734307902681
- Bullet Diameter: .459 inch
- Bullet Weight: 405 grains (with Lee's suggested alloy)
- Bullet Style: Round nose hollow base
- Caliber: .45 Caliber / .45-70 Government and similar
- Number of Cavities: 1 (single cavity)
- Bullet Overall Length: 1.100 inches
- Block Material: CNC machined aluminum
- Core Pin: Self-centering automatic core pin
- Country of Origin: United States
What’s Included
- Lee 459-405-HB single cavity hollow base mould block
- Hardwood mould handles
- Sprue plate
Frequently Asked Questions
What cartridge is the Lee 459-405-HB mould made for?
It casts a .459 diameter, 405 grain round nose hollow base bullet suited to the .45-70 Government and other large bore cartridges in that family. The 405 grain weight is a classic .45-70 load for both target work and hunting. Your finished diameter can run slightly under depending on alloy, which is normal for cast bullets.
Why is this hollow base mould single cavity only?
Lee builds all their hollow base and hollow point moulds as single cavity because the design relies on a self-centering automatic core pin to form the hollow and keep it aligned. That setup gives the fastest, most consistent moulding for hollow base bullets. You get one quality bullet per pour with excellent base consistency.
Does the Lee 459-405-HB mould come with handles?
Yes, the mould ships with hardwood handles and the sprue plate included, so you have what you need to start casting. You will still need your own lead pot, alloy, and lube to complete the process.
Do I need to break in the mould before casting good bullets?
Like most aluminum moulds, it benefits from a solid preheat and a short break-in. Many casters see the first dozen or so bullets come out frosty or incomplete, then the mould warms up and starts dropping clean, sharp bullets. Keeping the hinge lubed and running your lead hot speeds up good fill-out.



Reviews
There are no reviews yet.