$87.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Loading for the .416 Barrett puts you in rarefied air. This is a shortened, necked-down .50 BMG case pushing a 400-grain class projectile past 3,000 feet per second, and factory ammo for it is scarce and pricey. That is exactly why a quality die set matters, and Lee's Large Series 2-Die Set for the .416 Barrett gives you the two tools you need to build consistent rounds at home. Because this cartridge shares the same case head dimensions as the .50 BMG, handloading opens up a round that otherwise sits out of reach for most shooters.
The set is built from steel and includes a full length sizing die with an unbreakable decapping unit plus a bullet seating die. The sizer brings fired or mixed brass back to correct dimensions so it chambers cleanly, which is a real advantage when you are working with range pickups or once-fired cases. The seater handles nearly any point-style bullet and uses a floating seating punch to keep runout tight and your rounds concentric. Lee stands behind its rifle dies for low bullet runout, and on a cartridge chasing accuracy at 2,000-plus yards, that consistency is the whole point.
These are Large Series dies with the 1-1/4 inch by 12 thread. That means they fit the Lee Classic Cast Press and other large-format presses, not standard 7/8×14 setups. Make sure your press is set up for the big thread before you order, and remember you will need a compatible shell holder since one is not part of the set.
The kit ships with assembly and usage instructions to get you dialed in, but it does not include load data, a shell holder, or a powder dipper. Pull your load data from published sources like the Hodgdon and VihtaVuori manuals, since this high-pressure round runs best with the slowest propellants available. Pair these dies with quality brass and the right components and you have got everything you need to feed this beast of a cartridge on your own terms.
You get a full-length sizing die with an unbreakable decapping unit and a bullet seating die, plus instructions. It does not include a shell holder, powder dipper, or load data. Plan on sourcing a compatible large-series shell holder and pulling your load data from a published reloading manual.
These are Large Series dies with the 1-1/4 inch by 12 thread, so they fit the Lee Classic Cast Press and other large-format presses built for the big cartridges. They will not thread into a standard 7/8×14 press. Check your press setup before ordering to make sure you have got the large thread.
Factory .416 Barrett is expensive and not always easy to find, so handloading is how a lot of owners keep this rifle fed affordably. The full-length sizer lets you restore fired or mixed range brass to spec and fire form in your own chamber. With good components you can also tune loads for the accuracy this round is famous for at extreme range.
Yes, the bullet seating die handles nearly any point-style bullet and uses a floating seating punch to keep your rounds concentric. That floating design helps hold bullet runout to a minimum, which matters a lot on a cartridge meant to reach past 2,000 yards. It gives you room to experiment with the various heavy .416 projectiles on the market.
| UPC | 734307902520 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 90252 |
| Shipping Weight | 2.05 |
You must be logged in to post a review.
Reviews
There are no reviews yet.