0
0

Lee Precision Collet Neck Sizer Die .25-06 Remington (90957)

UPC: 734307909574

$22.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading .25-06 Remington for a rifle you shoot often, the Lee Precision Collet Neck Sizer Die is one of the simplest ways to tighten up your accuracy without a lot of extra fuss. Instead of running a case over an expander ball or working the whole body, it uses a steel collet to squeeze the neck down onto a precision mandrel. The result is a straight, concentric neck with very little runout, which translates to better bullet alignment and more consistent start pressure shot to shot.

How the .25-06 Collet Die Works

The magic here is in the collet itself. As the press ram comes up, the collet fingers close around the case neck and press it against the mandrel from the outside in. Because you're sizing from the outside against a fixed inside diameter, the neck ends up true and the wall thickness stays even. One thing worth knowing: this die sizes the neck only, so it's meant for brass that's already been fired in your rifle. It doesn't bump the shoulder or resize the body, which is exactly why it preserves that custom fit to your chamber.

Why Reloaders Reach for the Lee Collet Neck Sizer

Neck-only sizing is easy on your brass. Since you're not working the case body every cycle, cases stay fire-formed to your chamber and hold up a lot longer than full-length sized brass. Another nice perk is that the collet design needs no case lube, so there's no greasy cleanup afterward and no chance of a lube dent. It threads into any standard 7/8 x 14 single-stage or turret press, and it takes very little effort to run.

This is a smart pick for bolt-action .25-06 shooters chasing tight groups off their own fire-formed brass. If you want a full solution you can pair it with a seating die, but as a dedicated neck sizer it does one job and does it cleanly. Made in the USA by Lee Precision.

Key Specifications

  • Manufacturer: Lee Precision
  • Caliber: .25-06 Remington
  • Die Type: Collet Neck Sizing Die
  • Die Series: Collet
  • Thread: 7/8 x 14
  • Case Lube Required: No
  • Pieces in Set: 1
  • Origin: Made in USA
  • MPN: 90957
  • UPC: 734307909574
  • Shipping Weight: 0.55 lb

What’s Included

  • Lee Precision Collet Neck Sizer Die .25-06 Remington (90957)

Frequently Asked Questions

Does the Lee Collet Neck Sizer Die for .25-06 require case lube?

No, this is one of the big advantages of the collet design. It sizes the neck without any case lubrication, so there's no messy cleanup afterward and no risk of lube dents on your brass. It saves time and keeps your cases clean.

Can I use this die with brass fired from any .25-06 rifle?

It's meant for brass that has been fired in your own rifle. Because it only sizes the neck and leaves the body fire-formed to your chamber, it works best with cases dedicated to that gun. It's not the right choice if you're loading range-pickup brass or mixing brass across different rifles.

Will this die fit a standard reloading press?

Yes. It uses the standard 7/8 x 14 thread, so it threads right into common single-stage and turret presses. Just secure it in the press before you start sizing.

Does the collet die do everything I need to reload .25-06 Remington?

This die only handles neck sizing, so you'll still need a seating die to complete the loading process. Neck sizing is popular with bolt-action shooters chasing accuracy and longer brass life. Pair it with a seating die and you're set for a dedicated neck-sizing workflow.

Additional information

UPC

734307909574

Manufacturer

Manufacturer Part Number

90957

Shipping Weight

0.55

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Collet Neck Sizer Die .25-06 Remington (90957)”