0
0

Lee Precision Breech Lock 3-Die Set .38 Special / .357 Magnum (Carbide)

UPC: 734307918781

$42.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Lee Precision's Breech Lock 3-Die Set built for loading .38 Special and .357 Magnum, two of the most popular revolver cartridges around. The star of the show is the carbide full-length sizing die. Because the sizing ring is solid carbide, you don't need to lube your cases before running them through, which cuts out a messy, time-consuming step and keeps your brass clean. Lee grinds the carbide insert to a contour that sizes smoothly without leaving that ugly belt mark some cheaper carbide dies tend to stamp into the case.

The set is a three-die layout: the carbide sizing die, a powder-thru expanding die that charges and flares the case mouth in one motion, and a bullet seating die that handles seating and crimping. The seating die can be adjusted from a light touch all the way to a full roll crimp, which is exactly what you want for magnum loads that need to stay put under recoil. There's also a flat-nose seating screw included for folks running wadcutters and semi-wadcutters.

Why the Breech Lock System Earns Its Keep

The color-coded Smart Lock bushings are the real convenience here. Each die gets its own factory-installed bushing, so once you set your adjustments they stay locked in. Swapping dies becomes a quick twist instead of a re-adjustment every single session. If you've got the Breech Lock quick-change feature on your press, this set drops right in and out.

Running .357 Magnum Through This .38 Set

The same dies handle .357 Magnum and even .357 Maximum. You'll just back the powder-thru expander and the seating die out about two turns to account for the longer magnum case, with a little extra adjustment if you're loading .357 Max. Load data for both the magnum and the Maximum lives in Lee's Modern Reloading manual.

All three dies use the standard 7/8-14 thread, so they'll thread into any common single-stage or progressive press. It's a straightforward, well-priced set that gets folks loading good revolver ammo without a lot of fuss.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number (MPN): 91878
  • UPC: 734307918781
  • Caliber: .38 Special / .357 Magnum
  • Die Set Type: Breech Lock 3-Die Set
  • Sizing Die Material: Carbide (no case lube required)
  • Die Thread: 7/8-14
  • Bushings: Color-coded Smart Lock, factory installed
  • Crimp: Adjustable, slight taper to full roll
  • Country of Origin: United States
  • Length: 4.9 in
  • Shipping Weight: 1.25 lbs

What’s Included

  • Carbide Full Length Sizing Die
  • Powder Thru Expanding Die
  • Bullet Seating Die
  • Color-coded Smart Lock Bushings (factory installed)
  • Universal Shell Holder
  • Powder Dipper
  • Instructions and Load Data

Frequently Asked Questions

Do I need case lube with this Lee carbide 3-die set?

No, the full-length sizing die uses a solid carbide insert, so you can run your cases through without any lubricant. That saves you the lube-and-clean step entirely and keeps your brass tidy. Some folks still like a light touch of spray lube for very high-volume sessions, but it isn't required for .38 and .357 brass.

Can this .38 Special set actually load .357 Magnum too?

Yes, it handles both .38 Special and .357 Magnum, and even .357 Maximum. You just back the powder-thru expanding die and the bullet seating die out roughly two turns to account for the longer magnum case, with a bit more adjustment for the Maximum. Load data for the magnum and Maximum is found in Lee's Modern Reloading manual.

What are the Smart Lock bushings for?

The color-coded Smart Lock bushings come factory installed on each die and let you quickly identify and swap dies if your press has the Breech Lock quick-change feature. Once you dial in your settings, the bushing holds them, so you can pull a die and reinstall it later without readjusting. It's a big time-saver when you're bouncing between calibers.

Will these dies fit my press?

The dies use the standard 7/8-14 thread, which fits the vast majority of single-stage and progressive presses on the market. If your press supports the Lee Breech Lock quick-change system, you get the full benefit of the snap-in bushings. A universal shell holder is included in the set as well.

Additional information

UPC

734307918781

Manufacturer

Manufacturer Part Number

91878

Caliber/Gauge

.38 Special

Length

4.9000

Product Type

DELUXE PISTOL

Shipping Weight

1.25

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Breech Lock 3-Die Set .38 Special / .357 Magnum (Carbide)”