Description
The Lee Carbide 3-Die Set covers both .38 Short Colt and .38 Long Colt in one package, which makes it a go-to for folks keeping older Colt revolvers and converted cartridge guns fed. The headline here is the carbide full-length sizing die. The carbide ring means you can skip case lubrication altogether, so there's no greasy prep step and no need to tumble the lube back off afterward. Lee grinds the carbide to a contour that sizes smoothly without leaving that pronounced belt mark you see from ordinary carbide sizers.
What You Get in the .38 Short & Long Colt Die Set
Three dies handle the whole job. The carbide sizing die resizes and deprimes, the powder-through expanding die flares the case mouth just enough for easy bullet starting while letting you charge powder in the same stroke, and the bullet seating die sets your bullet and crimps in one motion. It's a tidy workflow whether you're running a single stage, a turret, or a progressive like a Dillon or Lee Pro setup.
Crimp Options on the Lee .38 Colt Dies
The seating die gives you an adjustable crimp that runs from a slight taper all the way to a full roll, so you can dial it in for the bullet and load you're using. Standard .358 diameter bullets run perfectly with this set and need nothing extra. If you're loading heel-base bullets for an original or converted percussion revolver, those require a separate collet crimp die, so plan accordingly.
From experience, these dies punch well above their price. Reloaders who've leaned on Lee pistol dies for decades tend to call them easy to set up and dependable round after round. Everything stores in a fitted plastic box, and the set ships with a universal shell holder, powder dipper, and load data so you're ready to go out of the box.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90276
- UPC: 734307902766
- Caliber: .38 Short Colt / .38 Long Colt
- Set Type: Carbide 3-Die Set
- Dies Included: 3
- Die Thread Size: 7/8-14
- Sizing Die: Carbide Full-Length (no case lube required)
- Crimp: Adjustable, slight taper to full roll
- Shell Holder: Included (universal)
- Length: 5.1 in
- Shipping Weight: 1.15 lb
- Country of Origin: United States
What’s Included
- Carbide full-length sizing die
- Powder-through expanding die
- Bullet seating die with adjustable crimp
- Universal shell holder
- Powder dipper
- Instructions and load data
- Fitted plastic storage box
Frequently Asked Questions
Do I need case lube with the Lee Carbide 3-Die Set?
No. The carbide full-length sizing die uses a carbide ring that lets you size cases without any lubrication. That saves you the lube-and-clean step, which is one of the main reasons reloaders reach for carbide pistol dies.
Can this set load both .38 Short Colt and .38 Long Colt?
Yes, it's built to handle both cartridges. The sizing and expanding dies work the same for either case, and you simply back the seating die out to reposition the crimp when switching to the longer .38 Long Colt. That flexibility makes it a favorite for cowboy action and vintage Colt shooters.
What kind of crimp does the seating die put on?
The bullet seating die is adjustable and ranges from a slight taper to a full roll crimp. You dial it in based on your bullet and load, so you have room to experiment. Standard .358 diameter bullets work great with no extra tools needed.
Will this work with heel-base bullets?
The dies in this set will not crimp a heel-base bullet. If you're loading heel-base bullets for an original or converted percussion-to-cartridge revolver, you'll want a separate collet crimp die for that job. For standard .358 bullets, this set handles everything on its own.



Reviews
There are no reviews yet.