Description
The Lee .50 Caliber Single-Cavity Minie Mold is made for folks who'd rather pour their own lead than pay for projectiles every time they hit the range. This is Lee's improved Minie design, and it drops a classic hollow-base conical bullet sized for .50 caliber muzzleloaders. Each one comes out right around .500 diameter, .940 in length, and tips the scale near 360 grains depending on your alloy. That hollow base is the whole point of a Minie, letting the skirt expand and grab the rifling for a tight seal and real accuracy out of a rifled bore.
What Sets the Lee .50 Caliber Minie Mold Apart
Lee machines these blocks out of aluminum, which does a couple of nice things for you. Aluminum heats up and cools down faster than iron or steel, so you can start throwing good bullets after only a few casts instead of babysitting a cold block all morning. It also weighs about a third of what a steel mold does, which your hands will thank you for during a long casting session. The blocks are rust resistant too, so storage is less of a headache.
How the Minie Mold Casts
To keep the bullets round and on-size, the two block halves are clamped together and lathe-bored, which Lee holds to .001 roundness or better. There's a tangential cut-off on the sprue plate that trims the nib clean so you're not fussing with a nub on every bullet. Users who've run these for years tend to report clean fill-out and good consistency, with more than a few saying the improved Minie shoots tighter than the typical conical bullet.
Getting Started with the Lee Minie Mold
This one ships with the handles and sprue plate already included, so you've got everything you need to start casting once you've got your lead pot going. If you're shooting a .50 caliber black powder rifle and want to feed it without constantly restocking, this mold pays for itself fast and keeps you in bullets for the long haul.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90472
- UPC: 734307904722
- Caliber: .50 Caliber
- Bullet Diameter: .500 inch
- Bullet Weight: 360 Grains
- Bullet Length: .940 inch
- Bullet Type: Hollow Base Improved Minie
- Cavities: Single Cavity
- Block Material: Aluminum
- Cavity Machining: Lathe-Bored, .001 Roundness or Less
- Overall Length: 10.75 inches
- Country of Origin: United States
What’s Included
- Lee .50 Caliber Single-Cavity Minie Mold block
- Mold handles
- Sprue plate
Frequently Asked Questions
What size and weight bullet does the Lee .50 Caliber Minie mold produce?
It casts a .500 diameter, .940 length hollow-base Minie bullet at roughly 360 grains. The exact weight shifts a little depending on the lead alloy you pour, so treat 360 as the ballpark. It's sized for .50 caliber black powder rifles.
Does this Minie mold come with handles?
Yes. This version ships with the handles and sprue plate included, so you've got a complete setup out of the box. You'll just need your own lead pot, alloy, and basic casting gear to get started.
Why choose an aluminum mold over steel or iron?
Aluminum heats up and cools down faster, so you can start producing good bullets after only a handful of casts. It also weighs about a third of a comparable steel or iron block, which cuts down on hand fatigue during longer casting runs. On top of that, the aluminum is rust resistant for easier storage.
What makes this an improved Minie design?
This is Lee's improved Minie, a hollow-base conical bullet whose skirt expands on firing to grip the rifling for a solid seal and good accuracy. The cavities are lathe-bored for tight roundness, and the sprue plate uses a tangential cut-off that leaves a clean base without a leftover nib. Casters who've run these often find they shoot tighter than a standard conical.



Reviews
There are no reviews yet.