$33.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Lee 92419 Micrometer Full Length 2-Die Set is built for 6mm Remington and 244 Remington brass, giving handloaders a straightforward path to accurate, repeatable ammo. The pairing here is the key: a full length sizing die that resizes the entire case back to factory dimensions, plus a micrometer bullet seating die that lets you set seating depth with clearly marked, easy-to-read graduations. If you ever need to come back to a proven load, just dial in your number and go.
Full length sizing is the way to go when you're working with mixed range brass or loading for more than one rifle. It squeezes the whole case down so your rounds chamber smoothly and feed reliably, which matters whether you're running a bolt gun or something that needs every round to drop in clean. That reliability is a big reason reloaders reach for a full length setup over neck-only sizing when consistency across different brass is the goal.
The micrometer seating die is where this set really shines. Instead of guessing and checking with a caliper over and over, you adjust seating depth by the numbers and lock it down. Both dies come fitted with Lee's Ultimate Lock Rings, so your settings hold between loading sessions and you're not re-zeroing every time you sit down at the bench. The dies use the industry-standard 7/8-14 thread, so they'll thread right into just about any standard reloading press you've already got.
Lee packs this set to get you going with everything but the components. You get the full length sizing die, the micrometer bullet seating die, a universal shell holder, a powder dipper, and instructions with load data, all tucked into a stackable storage case that keeps things organized and protected. If you're loading for a hunting rifle or a gun with magazine length limits, a separate Lee Factory Crimp die makes a nice companion to firm up that crimp and tighten groups even further.
This set is made for the 6mm Remington cartridge, which shares case dimensions with the older 244 Remington designation. If your brass is headstamped either 6mm Rem or 244 Rem, this is the right set for you.
Yes. These dies use the industry-standard 7/8-14 thread, so they'll screw into virtually any standard single-stage or turret reloading press on the market. There's no special press required.
The micrometer seater lets you adjust bullet seating depth by clearly marked numbers rather than trial and error with a caliper. That makes it easy to return to a known load and keep your results repeatable from one session to the next, especially since the Ultimate Lock Rings hold your settings in place.
Not necessarily, but it's a worthwhile add-on for certain loads. If you're loading for a hunting rifle or a firearm with magazine length restrictions that keep the bullet off the rifling, a Lee Factory Crimp die can help tighten up accuracy. For general bench loading of mixed brass, the two dies in this set cover the essentials.
| UPC | 734307924195 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 92419 |
You must be logged in to post a review.
Reviews
There are no reviews yet.