0
0

Lee 92279 Factory Crimp Die 7mm Backcountry Rifle Reloading

UPC: 734307922795

$12.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee 92279 Factory Crimp Die is the finishing touch for anyone building their own 7mm Backcountry loads. It is a single collet-style crimp die that works the brass from the outside in, squeezing the case mouth tight around the bullet instead of rolling it over from the top. That approach gives you a clean, consistent crimp without pushing the shoulder back or distorting the case, which is exactly what you want on a modern high-pressure cartridge like the 7mm Backcountry.

What the 92279 Factory Crimp Die Does on the Bench

The die uses four collet fingers that close inward on the last bit of the case neck as the shell holder pushes the collet up into the die body. Because the crimp is a separate step from seating, you are not fighting bullet seating depth and crimp at the same time. Setup is about as simple as it gets: thread the die down until it touches the shell holder, then snug it a bit further to dial in crimp strength. The result is a segmented straight crimp similar to what you see on factory-loaded ammunition.

Why Reloaders Reach for the 7mm Backcountry Crimp Die

A firm crimp means pressure has to build to a higher level before the bullet starts to move, which helps even out the pressure curve and tends to tighten up velocity spread across a string. One of the real strengths here is that the collet is strong enough to form a crimp even on bullets that have no cannelure or crimp groove, so you are not limited in your bullet selection. Hunters in particular appreciate the extra bullet hold, since it keeps rounds from backing out during recoil, feeding, and the knocking around that comes with a backcountry hunt.

Pairing the Lee Crimp Die With Your Setup

The 92279 is sold as a standalone die, so it slides right into your existing 7mm Backcountry die lineup or rounds out the Lee Micrometer Full Length set. It uses standard 7/8-14 threading, meaning it drops into just about any common single-stage or turret press without fuss. If you already size and seat but want tighter, more repeatable ammo for the field, this is the piece that ties it together.

Key Specifications

  • Brand: Lee Precision
  • Model / Part Number: 92279
  • UPC: 734307922795
  • Caliber: 7mm Backcountry
  • Product Type: Factory Crimp Die (Collet Style)
  • Crimp Style: Segmented straight crimp
  • Gun Type: Rifle
  • Dies in Set: 1
  • Thread: 7/8-14
  • Country of Origin: United States
  • Shipping Weight: 0.3 lbs

What’s Included

  • (1) Lee 7mm Backcountry Factory Crimp Die
  • Instructions

Frequently Asked Questions

Do my bullets need a crimp groove to use the 7mm Backcountry Factory Crimp Die?

No. The collet in this die is strong enough to form its own crimp, so it works well on bullets that have no cannelure or crimp groove. That gives you the freedom to run match or hunting bullets that were never designed with a groove in the first place.

Is the Lee 92279 a complete die set or just the crimp die?

It is a single standalone crimp die. You will still need a sizing die and a seating die to load 7mm Backcountry, which the Lee Micrometer Full Length set covers. Many reloaders add this crimp die to that set for a final, more uniform crimp step.

How is a collet-style factory crimp different from crimping in a seating die?

A seating die rolls the case mouth over using downward pressure, which is tied directly to your seating adjustment. The Lee Factory Crimp Die instead squeezes the neck inward with a collet as a separate operation, so it will not push the shoulder back or get thrown off by seating depth. That separation makes it much easier to get a repeatable crimp round after round.

Will this die fit a standard reloading press?

Yes. It uses the common 7/8-14 die thread, so it threads into virtually any standard single-stage or turret press. Setup is straightforward: run it down to the shell holder and snug it in to set your crimp.

Additional information

UPC

734307922795

Manufacturer

Manufacturer Part Number

92279

Caliber/Gauge

7MM

Shipping Weight

0.3

Reviews

There are no reviews yet.

Be the first to review “Lee 92279 Factory Crimp Die 7mm Backcountry Rifle Reloading”