Description
Reloading for the 7mm WSM gets a whole lot easier with this Lee Precision two-die set. It's built around a micrometer bullet seating die and a full length sizing die, giving you everything needed to turn fired or fresh brass into consistent, accurate rounds. The 7mm Winchester Short Magnum is a flat-shooting short-action cartridge that throws a .284 bullet, and it earns its keep on everything from deer to elk, so having dies that let you fine-tune your loads really pays off at the range and in the field.
What the 7mm WSM Micrometer Die Set Brings to the Bench
The standout here is the micrometer seating die. The thimble is laser engraved in .001-inch divisions and reads just like a precision depth micrometer, so instead of guessing and checking with trial-and-error turns, you can dial your seating depth right to the number you want. A floating bullet guide keeps the case mouth and bullet lined up during seating, which cuts down on runout and helps your ammo shoot more uniformly. The adjustment is smooth with no clicks, and once you set it, it tends to hold its spot load after load.
Full Length Sizing for New and Mixed Range Brass
The full length sizing die brings cases back to factory original dimensions, which is exactly what you want if you're loading mixed range brass or feeding more than one rifle. It's a steel die and takes case lube to run smoothly. If you prefer to separate your seating and crimping steps, the matching Lee Factory Crimp Die is sold separately and drops right in.
Fits Your Press and Comes Ready to Go
Both dies carry standard 7/8-14 threads, so they'll thread into any common press from Lee, RCBS, Hornady, Lyman, Dillon and the rest. Ultimate Lock Rings come installed on each die to hold your settings between sessions, and the set ships with a universal shell holder, a powder dipper, and printed instructions with load data to help you get rolling.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90573
- UPC: 734307905736
- Cartridge: 7mm WSM (Winchester Short Magnum)
- Die Style: Micrometer Full Length 2-Die Set
- Number of Dies: 2
- Die Type: Full Length Sizing Die, Micrometer Bullet Seating Die
- Sizing Die Material: Steel
- Micrometer Increments: .001 inch
- Thread: Standard 7/8-14
- Lock Rings: Ultimate Lock Rings installed
- Lubrication: Required for sizing
- Shipping Weight: 0.8 lbs
- Country of Origin: USA
What’s Included
- Full Length Sizing Die
- Micrometer Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions with load data
Frequently Asked Questions
What makes the micrometer seating die different from a standard Lee seating die?
The micrometer version has a laser engraved thimble that reads in .001-inch increments, just like a depth micrometer. That lets you dial your seating depth to an exact number instead of adjusting by feel and re-measuring. It also uses a floating bullet guide that keeps the case and bullet aligned for less runout and more uniform ammo.
Will this 7mm WSM die set work in my press?
Yes. Both dies use standard 7/8-14 threads, so they fit common presses from Lee, RCBS, Hornady, Lyman, Dillon and others. No special adapters are needed.
Do I need case lube with the full length sizing die?
You do. The full length sizing die is steel and resizes the entire case body, so lubrication is required to keep cases moving smoothly and avoid getting one stuck. A light, even coat of case lube before sizing is all it takes.
Does this set include a factory crimp die?
No, the factory crimp die is not part of this two-die set. The micrometer seating die can apply a crimp while seating if you want, but many handloaders prefer the separate Lee Factory Crimp Die for 7mm WSM to split those steps apart. It's sold separately and uses the same standard threads.




Reviews
There are no reviews yet.